# Replcaement Print Module for Snapmaker Original

**URL:** <https://forum.snapmaker.com/t/replcaement-print-module-for-snapmaker-original/29030>\
**Category:** Original (3-in-1)\
**Created:** [January 16, 2023, 12:49am UTC](https://forum.snapmaker.com/t/replcaement-print-module-for-snapmaker-original/29030 "2023-01-16T00:49:20Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![wnAWS](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/wnaws/32/20467_2.png) [@wnAWS](https://forum.snapmaker.com/u/wnAWS)\
**Post date:** [January 16, 2023, 12:49am UTC](https://forum.snapmaker.com/t/replcaement-print-module-for-snapmaker-original/29030/1 "2023-01-16T00:49:20Z")

</div>

Does anyone know where I can get a replacement Print Module for the Snapmaker Original?  
Thanks.

---

<div class="post-metadata">

**Author:** ![Riskey](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/riskey/32/20010_2.png) [@Riskey](https://forum.snapmaker.com/u/Riskey)\
**Post date:** [January 16, 2023, 4:35am UTC](https://forum.snapmaker.com/t/replcaement-print-module-for-snapmaker-original/29030/2 "2023-01-16T04:35:46Z")

</div>

You can contact our Support at [support@snapmaker.com](mailto:support@snapmaker.com). 😊

---

<div class="post-metadata">

**Author:** ![wnAWS](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/wnaws/32/20467_2.png) [@wnAWS](https://forum.snapmaker.com/u/wnAWS)\
**Post date:** [January 16, 2023, 11:53am UTC](https://forum.snapmaker.com/t/replcaement-print-module-for-snapmaker-original/29030/3 "2023-01-16T11:53:14Z")

</div>

Thanks very much. I’ll get an email out today.

---

<div class="post-metadata">

**Author:** ![wnAWS](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/wnaws/32/20467_2.png) [@wnAWS](https://forum.snapmaker.com/u/wnAWS)\
**Post date:** [February 14, 2023, 12:55pm UTC](https://forum.snapmaker.com/t/replcaement-print-module-for-snapmaker-original/29030/4 "2023-02-14T12:55:09Z")

</div>

Just a quick shout out to Snapmaker, Support, who did reply with some very valuable advice. Problems like this are difficult and take time, but it seems the support team don’t give up easily. Thanks again.