# Recovery after power failure, not exactly working

**URL:** <https://forum.snapmaker.com/t/recovery-after-power-failure-not-exactly-working/17204>\
**Category:** Snapmaker 2.0 (3-in-1)\
**Created:** [March 22, 2021, 9:38pm UTC](https://forum.snapmaker.com/t/recovery-after-power-failure-not-exactly-working/17204 "2021-03-22T21:38:56Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![Edwin](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/edwin/32/13481_2.png) [@Edwin](https://forum.snapmaker.com/u/Edwin)\
**Post date:** [March 23, 2021, 7:09am UTC](https://forum.snapmaker.com/t/recovery-after-power-failure-not-exactly-working/17204/2 "2021-03-23T07:09:47Z")

</div>

@dbvanhorn

- Which version of firmware you were using?
- Could you please upgrade [the latest firmware](https://forum.snapmaker.com/t/snapmaker-2-0-firmware-updates-and-downloads/5443/12) and try to resume the print again.
- You can send some photos of the shifted model so that I can confirm it.
- PM me the STL and G-code file you failed to resume.

Best regards  
Edwin

---

_[View the full topic](https://forum.snapmaker.com/t/recovery-after-power-failure-not-exactly-working/17204)._