# Ray - Materialtests

**URL:** <https://forum.snapmaker.com/t/ray-materialtests/33665>\
**Category:** Ray (Laser)\
**Created:** [November 17, 2023, 12:14pm UTC](https://forum.snapmaker.com/t/ray-materialtests/33665 "2023-11-17T12:14:43Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![aluebber](https://avatars.discourse-cdn.com/v4/letter/a/e9bcb4/32.png) [@aluebber](https://forum.snapmaker.com/u/aluebber)\
**Post date:** [November 17, 2023, 12:14pm UTC](https://forum.snapmaker.com/t/ray-materialtests/33665/1 "2023-11-17T12:14:43Z")

</div>

Hi @ll,  
I had some difficulties to set the correct parameters for some materials. Maybe we can collect some parameters here.

Material:  
V2A, K240, sanded, 1mm thickness. LB Material test.

 ![V2A_K240_1mm_LB](https://us1.discourse-cdn.com/flex022/uploads/snapmaker/original/3X/1/a/1a1e38caf0efe17efb948f3ae28d6747b05b9cd0.jpeg)

---

<div class="post-metadata">

**Author:** ![nweb](https://avatars.discourse-cdn.com/v4/letter/n/91b2a8/32.png) [@nweb](https://forum.snapmaker.com/u/nweb)\
**Post date:** [December 7, 2023, 3:24am UTC](https://forum.snapmaker.com/t/ray-materialtests/33665/2 "2023-12-07T03:24:28Z")

</div>

I like the idea of a shared depot of material tests.  
VERY nice job on the SS test - Thank you for sharing.  
**Be sure to mention 40w or 20w tool head!**

I have at least one oddball fun one I should be able to upload when I’m back at my desk. (double-sided whiteboard mdf both cut and engrave patterns)

---

<div class="post-metadata">

**Author:** ![cgault83](https://avatars.discourse-cdn.com/v4/letter/c/439d5e/32.png) [@cgault83](https://forum.snapmaker.com/u/cgault83)\
**Post date:** [December 9, 2023, 8:28pm UTC](https://forum.snapmaker.com/t/ray-materialtests/33665/3 "2023-12-09T20:28:39Z")

</div>

I’m working with the 40W on the A350 and was wondering if you could post the .snaplzr file for this test?

---

<div class="post-metadata">

**Author:** ![aluebber](https://avatars.discourse-cdn.com/v4/letter/a/e9bcb4/32.png) [@aluebber](https://forum.snapmaker.com/u/aluebber)\
**Post date:** [December 14, 2023, 7:26pm UTC](https://forum.snapmaker.com/t/ray-materialtests/33665/4 "2023-12-14T19:26:20Z")

</div>

Hi,  
i used Lightburn for this becus Luban doesn’t have a material test yet. Maybe i will create one by hand because Luban has a special option for distance (with dots and not like luban with lines), which gives a smoother color on stainless stell.

---

<div class="post-metadata">

**Author:** ![aluebber](https://avatars.discourse-cdn.com/v4/letter/a/e9bcb4/32.png) [@aluebber](https://forum.snapmaker.com/u/aluebber)\
**Post date:** [December 14, 2023, 7:27pm UTC](https://forum.snapmaker.com/t/ray-materialtests/33665/5 "2023-12-14T19:27:47Z")

</div>

40W by the way