# R extruder prints in the wrong place when it is the first extruder to print

**URL:** <https://forum.snapmaker.com/t/r-extruder-prints-in-the-wrong-place-when-it-is-the-first-extruder-to-print/35863>\
**Category:** J1/J1s IDEX\
**Created:** [May 15, 2024, 4:18am UTC](https://forum.snapmaker.com/t/r-extruder-prints-in-the-wrong-place-when-it-is-the-first-extruder-to-print/35863 "2024-05-15T04:18:26Z")\
**Posts on this page:** 1\
**Showing post:** 7

<div class="post-metadata">

**Author:** ![MarkA121](https://avatars.discourse-cdn.com/v4/letter/m/e9bcb4/32.png) [@MarkA121](https://forum.snapmaker.com/u/MarkA121)\
**Post date:** [May 16, 2024, 5:32pm UTC](https://forum.snapmaker.com/t/r-extruder-prints-in-the-wrong-place-when-it-is-the-first-extruder-to-print/35863/7 "2024-05-16T17:32:10Z")

</div>

On my other thread, ‘Printer not working for 2 color prints’, Stelzer has provided a link to a command line tool for sending gcode files to the J1s over wifi. Another piece of the puzzle to explore!

> **[GitHub - macdylan/sm2uploader: A command-line tool for send the gcode file to...](https://github.com/macdylan/sm2uploader)**
>
> A command-line tool for send the gcode file to Snapmaker Printers via WiFi connection. - macdylan/sm2uploader

---

_[View the full topic](https://forum.snapmaker.com/t/r-extruder-prints-in-the-wrong-place-when-it-is-the-first-extruder-to-print/35863)._
