# Quarter inch collet?

**URL:** <https://forum.snapmaker.com/t/quarter-inch-collet/15998>\
**Category:** Snapmaker 2.0 (3-in-1)\
**Created:** [February 16, 2021, 11:49pm UTC](https://forum.snapmaker.com/t/quarter-inch-collet/15998 "2021-02-16T23:49:33Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![jamesP](https://avatars.discourse-cdn.com/v4/letter/j/a698b9/32.png) [@jamesP](https://forum.snapmaker.com/u/jamesP)\
**Post date:** [February 16, 2021, 11:49pm UTC](https://forum.snapmaker.com/t/quarter-inch-collet/15998/1 "2021-02-16T23:49:33Z")

</div>

I was just reading that the CNC tool head will accept bits up to a quarter inch - where can you get the spring collet for allowing this because the one you get with it will not fit a quarter inch bit and I can’t seem to find it for sale on the Snapmaker Home page either? Thank you

---

<div class="post-metadata">

**Author:** ![sdj544](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/sdj544/32/11365_2.png) [@sdj544](https://forum.snapmaker.com/u/sdj544)\
**Post date:** [February 16, 2021, 11:55pm UTC](https://forum.snapmaker.com/t/quarter-inch-collet/15998/2 "2021-02-16T23:55:30Z")

</div>

Just search amazon or ebay for er11 collets.  
You can get a set of various sizes for fairly cheap.  
-S

---

<div class="post-metadata">

**Author:** ![jamesP](https://avatars.discourse-cdn.com/v4/letter/j/a698b9/32.png) [@jamesP](https://forum.snapmaker.com/u/jamesP)\
**Post date:** [February 16, 2021, 11:58pm UTC](https://forum.snapmaker.com/t/quarter-inch-collet/15998/3 "2021-02-16T23:58:31Z")

</div>

Thank you for that info - I will do that for sure.