# Prusaslicer setup on SM2.0 350

**URL:** <https://forum.snapmaker.com/t/prusaslicer-setup-on-sm2-0-350/18716>\
**Category:** Snapmaker 2.0 (3-in-1)\
**Created:** [May 16, 2021, 5:09pm UTC](https://forum.snapmaker.com/t/prusaslicer-setup-on-sm2-0-350/18716 "2021-05-16T17:09:05Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![BlakEstrada](https://avatars.discourse-cdn.com/v4/letter/b/85e7bf/32.png) [@BlakEstrada](https://forum.snapmaker.com/u/BlakEstrada)\
**Post date:** [May 16, 2021, 5:09pm UTC](https://forum.snapmaker.com/t/prusaslicer-setup-on-sm2-0-350/18716/1 "2021-05-16T17:09:05Z")

</div>

I’ve been reading throw the form about using Prusa slicer, and I am hesitant to plug and play the profile given. im not sure if it works today with Prusa 2.3.1. or if I’m even putting the right code in the right places. there is a lot of very clear steps on cure profiles for snapmaker but i feeling lost when it comes to Prusa. can anyone help me set this up

---

<div class="post-metadata">

**Author:** ![Edwin](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/edwin/32/13481_2.png) [@Edwin](https://forum.snapmaker.com/u/Edwin)\
**Post date:** [May 17, 2021, 8:07am UTC](https://forum.snapmaker.com/t/prusaslicer-setup-on-sm2-0-350/18716/2 "2021-05-17T08:07:34Z")

</div>

We have not updated the Prusa Slicer configuration up to now. You guys can pull a request on our GitHub page.  
[https://github.com/Snapmaker/Luban/pulls](https://github.com/Snapmaker/Luban/pulls)

---

<div class="post-metadata">

**Author:** ![BlakEstrada](https://avatars.discourse-cdn.com/v4/letter/b/85e7bf/32.png) [@BlakEstrada](https://forum.snapmaker.com/u/BlakEstrada)\
**Post date:** [May 17, 2021, 8:00pm UTC](https://forum.snapmaker.com/t/prusaslicer-setup-on-sm2-0-350/18716/3 "2021-05-17T20:00:32Z")

</div>

I’m having issues with the code provided is there any one who can help me out with the steps