# Prusaslicer - printer doesn't change to 2nd bed temperature

**URL:** <https://forum.snapmaker.com/t/prusaslicer-printer-doesnt-change-to-2nd-bed-temperature/12640>\
**Category:** Snapmaker 2.0 (3-in-1)\
**Created:** [December 13, 2020, 4:01pm UTC](https://forum.snapmaker.com/t/prusaslicer-printer-doesnt-change-to-2nd-bed-temperature/12640 "2020-12-13T16:01:09Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![RedshiftVelocities](https://avatars.discourse-cdn.com/v4/letter/r/8e8cbc/32.png) [@RedshiftVelocities](https://forum.snapmaker.com/u/RedshiftVelocities)\
**Post date:** [December 13, 2020, 4:01pm UTC](https://forum.snapmaker.com/t/prusaslicer-printer-doesnt-change-to-2nd-bed-temperature/12640/1 "2020-12-13T16:01:09Z")

</div>

I use Prusaslicer as my main slicer, and I’ve encountered a bit of a strange error with it: I’ll have two different bed temperatures set for the first and all subsequent layers, but the printer stays at the first one. I’m printing from gcode generated by the slicer via USB. It will properly change to my second extruder temperature, though. Does anyone know a fix for this? Thanks!