# Problems updating firmware **URL:** \ **Category:** Snapmaker 2.0 (3-in-1)\ **Tags:** Firmware\ **Created:** [November 27, 2024, 5:08am UTC](https://forum.snapmaker.com/t/problems-updating-firmware/38252 "2024-11-27T05:08:36Z")\ **Posts on this page:** 1\ **Showing post:** 3
**Author:** ![Skreelink](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/skreelink/32/16398_2.png) [@Skreelink](https://forum.snapmaker.com/u/Skreelink)\ **Post date:** [November 27, 2024, 12:35pm UTC](https://forum.snapmaker.com/t/problems-updating-firmware/38252/3 "2024-11-27T12:35:02Z")
It’s easier to download the firmware file and place it on the USB drive. > [@Snapmaker 2.0 Firmware Updates and Downloads](https://forum.snapmaker.com/t/snapmaker-2-0-firmware-updates-and-downloads/5443/39): > > Jul 18 2024: Snapmaker2\_V1.20.3 Thank you for your suggestions on how to make the Snapmaker 2.0 better. Your feedback is always appreciated. Here comes the latest version of the Snapmaker 2.0 firmware. Changelog Touchscreen Bug Fixes Fixed a bug that the Air Purifier “Auto Turn On” option was not activated during machining of 20W/40W Laser Module or 2W Infrared Laser Module Module Bug Fixes Fixed a bug that 2W Infrared Laser Module would automatically emit upon initialization Improvements … Simply download the .bin file, place it on the USB drive, put the USB into the snapmaker and “print” the update file. Make sure to turn it off and run it again for each toolhead to ensure all the modules are updated as well. --- _[View the full topic](https://forum.snapmaker.com/t/problems-updating-firmware/38252)._