# Problems Generating G Code in Luban **URL:** \ **Category:** Snapmaker Luban\ **Created:** [April 20, 2020, 8:56pm UTC](https://forum.snapmaker.com/t/problems-generating-g-code-in-luban/6180 "2020-04-20T20:56:30Z")\ **Posts on this page:** 20\ **Page:** 1
**Author:** ![draconicmage101](https://avatars.discourse-cdn.com/v4/letter/d/3bc359/32.png) [@draconicmage101](https://forum.snapmaker.com/u/draconicmage101)\ **Post date:** [April 20, 2020, 8:56pm UTC](https://forum.snapmaker.com/t/problems-generating-g-code-in-luban/6180/1 "2020-04-20T20:56:30Z")
Hi I am new to 3D printing and waiting for my snapmaker 2.0 to be delivered but i wanted to practice using the software to make models. I loaded a STL file i got from myminifactory enlarged made a custom file for high quality just clicking on generate support. when i hit generate code it got to Slicing 100% and then just stopped i cant load the G-Code to workspace or even Export G-Code to File. I am using windows 10 ---
**Author:** ![Bilzer](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/bilzer/32/4496_2.png) [@Bilzer](https://forum.snapmaker.com/u/Bilzer)\ **Post date:** [April 20, 2020, 9:02pm UTC](https://forum.snapmaker.com/t/problems-generating-g-code-in-luban/6180/2 "2020-04-20T21:02:52Z")
Hey @draconicmage101, did you download the newest [Luban 3.4.2](https://forum.snapmaker.com/t/snapmaker-luban-downloads-and-updates/4949/11) software? ---
**Author:** ![draconicmage101](https://avatars.discourse-cdn.com/v4/letter/d/3bc359/32.png) [@draconicmage101](https://forum.snapmaker.com/u/draconicmage101)\ **Post date:** [April 20, 2020, 9:03pm UTC](https://forum.snapmaker.com/t/problems-generating-g-code-in-luban/6180/3 "2020-04-20T21:03:31Z")
i got it from the snapmaker site the 3.3.3 ---
**Author:** ![Bilzer](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/bilzer/32/4496_2.png) [@Bilzer](https://forum.snapmaker.com/u/Bilzer)\ **Post date:** [April 20, 2020, 9:15pm UTC](https://forum.snapmaker.com/t/problems-generating-g-code-in-luban/6180/4 "2020-04-20T21:15:49Z")
test it with the new one ---
**Author:** ![draconicmage101](https://avatars.discourse-cdn.com/v4/letter/d/3bc359/32.png) [@draconicmage101](https://forum.snapmaker.com/u/draconicmage101)\ **Post date:** [April 20, 2020, 9:18pm UTC](https://forum.snapmaker.com/t/problems-generating-g-code-in-luban/6180/5 "2020-04-20T21:18:50Z")
downloaded the new one and tested still having the same issue just stuck at 100% ![Snapmaker GCode Problems](https://us1.discourse-cdn.com/flex022/uploads/snapmaker/original/2X/0/0dca2d675e4e52584397a80516dab722339f7bcb.jpeg) ---
**Author:** ![Bilzer](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/bilzer/32/4496_2.png) [@Bilzer](https://forum.snapmaker.com/u/Bilzer)\ **Post date:** [April 20, 2020, 9:22pm UTC](https://forum.snapmaker.com/t/problems-generating-g-code-in-luban/6180/6 "2020-04-20T21:22:02Z")
what happens if you put off the support? ---
**Author:** ![draconicmage101](https://avatars.discourse-cdn.com/v4/letter/d/3bc359/32.png) [@draconicmage101](https://forum.snapmaker.com/u/draconicmage101)\ **Post date:** [April 20, 2020, 9:27pm UTC](https://forum.snapmaker.com/t/problems-generating-g-code-in-luban/6180/7 "2020-04-20T21:27:00Z")
still doing the same thing ![Snapmaker GCode Problems Recommended High Quality Issues](https://us1.discourse-cdn.com/flex022/uploads/snapmaker/original/2X/a/a2c44ce880c11bb5be8fddfa3ee17a7fc2ecccd0.jpeg) ---
**Author:** ![Bilzer](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/bilzer/32/4496_2.png) [@Bilzer](https://forum.snapmaker.com/u/Bilzer)\ **Post date:** [April 20, 2020, 9:49pm UTC](https://forum.snapmaker.com/t/problems-generating-g-code-in-luban/6180/8 "2020-04-20T21:49:15Z")
very special in my Luban isn’t a problem. you can test it also with the Snapmakerjs software ![Bildschirmfoto 2020-04-20 um 23.46.52](https://us1.discourse-cdn.com/flex022/uploads/snapmaker/original/2X/f/fef45aa0211a220316ca4bea92fdf79ff68b538b.jpeg) ---
**Author:** ![draconicmage101](https://avatars.discourse-cdn.com/v4/letter/d/3bc359/32.png) [@draconicmage101](https://forum.snapmaker.com/u/draconicmage101)\ **Post date:** [April 20, 2020, 9:55pm UTC](https://forum.snapmaker.com/t/problems-generating-g-code-in-luban/6180/9 "2020-04-20T21:55:01Z")
does the high quality work for you also ---
**Author:** ![draconicmage101](https://avatars.discourse-cdn.com/v4/letter/d/3bc359/32.png) [@draconicmage101](https://forum.snapmaker.com/u/draconicmage101)\ **Post date:** [April 20, 2020, 9:57pm UTC](https://forum.snapmaker.com/t/problems-generating-g-code-in-luban/6180/10 "2020-04-20T21:57:39Z")
just tried it using fast print i generates the gcode but when i do high quality it doesnt ---
**Author:** ![Bilzer](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/bilzer/32/4496_2.png) [@Bilzer](https://forum.snapmaker.com/u/Bilzer)\ **Post date:** [April 20, 2020, 10:01pm UTC](https://forum.snapmaker.com/t/problems-generating-g-code-in-luban/6180/11 "2020-04-20T22:01:46Z")
yes it does with high quality but it will take 3 minutes i think your model will have longer ---
**Author:** ![draconicmage101](https://avatars.discourse-cdn.com/v4/letter/d/3bc359/32.png) [@draconicmage101](https://forum.snapmaker.com/u/draconicmage101)\ **Post date:** [April 20, 2020, 10:02pm UTC](https://forum.snapmaker.com/t/problems-generating-g-code-in-luban/6180/12 "2020-04-20T22:02:56Z")
ok going to try high quality again and leave it for awhile ---
**Author:** ![draconicmage101](https://avatars.discourse-cdn.com/v4/letter/d/3bc359/32.png) [@draconicmage101](https://forum.snapmaker.com/u/draconicmage101)\ **Post date:** [April 20, 2020, 10:47pm UTC](https://forum.snapmaker.com/t/problems-generating-g-code-in-luban/6180/13 "2020-04-20T22:47:23Z")
@Bilzer still hasnt generated the g-code ---
**Author:** ![JKC20](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/jkc20/32/5208_2.png) [@JKC20](https://forum.snapmaker.com/u/JKC20)\ **Post date:** [April 21, 2020, 3:54am UTC](https://forum.snapmaker.com/t/problems-generating-g-code-in-luban/6180/14 "2020-04-21T03:54:02Z")
Could you post the STL file here? How big is the file? ---
**Author:** ![draconicmage101](https://avatars.discourse-cdn.com/v4/letter/d/3bc359/32.png) [@draconicmage101](https://forum.snapmaker.com/u/draconicmage101)\ **Post date:** [April 21, 2020, 4:37am UTC](https://forum.snapmaker.com/t/problems-generating-g-code-in-luban/6180/15 "2020-04-21T04:37:44Z")
the file is to large its 92,066kb ---
**Author:** ![Bilzer](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/bilzer/32/4496_2.png) [@Bilzer](https://forum.snapmaker.com/u/Bilzer)\ **Post date:** [April 21, 2020, 7:19am UTC](https://forum.snapmaker.com/t/problems-generating-g-code-in-luban/6180/16 "2020-04-21T07:19:13Z")
can you send it to me via [wetranfer](https://wetransfer.com/). ---
**Author:** ![Bilzer](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/bilzer/32/4496_2.png) [@Bilzer](https://forum.snapmaker.com/u/Bilzer)\ **Post date:** [April 21, 2020, 5:36pm UTC](https://forum.snapmaker.com/t/problems-generating-g-code-in-luban/6180/17 "2020-04-21T17:36:22Z")
Wow an awesome modell I’ve test it on my **mac book pro**. Normal hight quality will work. slicing 5min / G-Code 30sec Hight quality with Retract at layer change works also. And with support it slicing 8min an stock by 100% in **Winfows 10:** Normal hight quality, it is calculated but not displayed. with more manual settings it stocks also. ---
**Author:** ![Bilzer](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/bilzer/32/4496_2.png) [@Bilzer](https://forum.snapmaker.com/u/Bilzer)\ **Post date:** [April 21, 2020, 5:38pm UTC](https://forum.snapmaker.com/t/problems-generating-g-code-in-luban/6180/18 "2020-04-21T17:38:02Z")
@JKC20 give me a mailadress i will send you the STL over wetransfer ---
**Author:** ![draconicmage101](https://avatars.discourse-cdn.com/v4/letter/d/3bc359/32.png) [@draconicmage101](https://forum.snapmaker.com/u/draconicmage101)\ **Post date:** [April 22, 2020, 12:32am UTC](https://forum.snapmaker.com/t/problems-generating-g-code-in-luban/6180/19 "2020-04-22T00:32:34Z")
i tried but its not working for me for some reason and i adjust the 3 sizes to 150% because i want it bigger ---
**Author:** ![JKC20](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/jkc20/32/5208_2.png) [@JKC20](https://forum.snapmaker.com/u/JKC20)\ **Post date:** [April 22, 2020, 2:54am UTC](https://forum.snapmaker.com/t/problems-generating-g-code-in-luban/6180/20 "2020-04-22T02:54:58Z")
Thanks I’ve been contacted by dracon. We will try the file to see if the problem is reproducible. [Next page](https://forum.snapmaker.com/t/problems-generating-g-code-in-luban/6180.md?page=2)