# A350 / Fusion / CNC / 2026 Issue

**URL:** <https://forum.snapmaker.com/t/probleme-a350-fusion-cnc-2026/42942>\
**Category:** Snapmaker 2.0 (3-in-1)\
**Created:** [August 11, 2026, 2:20pm UTC](https://forum.snapmaker.com/t/probleme-a350-fusion-cnc-2026/42942 "2026-08-11T14:20:11Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Knightrider](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/knightrider/32/33772_2.png) [@Knightrider](https://forum.snapmaker.com/u/Knightrider)\
**Post date:** [August 11, 2026, 2:20pm UTC](https://forum.snapmaker.com/t/probleme-a350-fusion-cnc-2026/42942/1 "2026-08-11T14:20:11Z")

</div>

Hello,

Since the latest Fusion update, my Snap A350 is listed as “Obsolete” in the machines section, and the post-processor shows “Not compatible.”  
I haven’t made any changes to the installed printers or post-processors.  
Do you have any ideas about this issue?

 ![Capture d’écran 2026-08-11 à 01.00.06](https://us1.discourse-cdn.com/flex022/uploads/snapmaker/original/3X/e/3/e38dbf3dd6a67190fa9030036aa52dffc7db578a.png)

---

<div class="post-metadata">

**Author:** ![Thick8](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/thick8/32/4040_2.png) [@Thick8](https://forum.snapmaker.com/u/Thick8)\
**Post date:** [August 12, 2026, 12:05am UTC](https://forum.snapmaker.com/t/probleme-a350-fusion-cnc-2026/42942/2 "2026-08-12T00:05:53Z")

</div>

I just did a setup to test. Seems to be working for me.

 ![image](https://us1.discourse-cdn.com/flex022/uploads/snapmaker/original/3X/d/4/d4c4f5b5c9476cf6206647441e726716f17a9ce8.png)

---

<div class="post-metadata">

**Author:** ![Knightrider](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/knightrider/32/33772_2.png) [@Knightrider](https://forum.snapmaker.com/u/Knightrider)\
**Post date:** [August 12, 2026, 12:37am UTC](https://forum.snapmaker.com/t/probleme-a350-fusion-cnc-2026/42942/3 "2026-08-12T00:37:08Z")

</div>

Thank you for your reply.  
I reworked some old files without any issues.

I must have made a mistake somewhere.
