# Problem confirmation models

**URL:** <https://forum.snapmaker.com/t/problem-confirmation-models/17833>\
**Category:** Showcase & Prints\
**Created:** [April 13, 2021, 8:44am UTC](https://forum.snapmaker.com/t/problem-confirmation-models/17833 "2021-04-13T08:44:44Z")\
**Posts on this page:** 1\
**Showing post:** 6

<div class="post-metadata">

**Author:** ![clewis](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/clewis/32/3255_2.png) [@clewis](https://forum.snapmaker.com/u/clewis)\
**Post date:** [April 13, 2021, 6:28pm UTC](https://forum.snapmaker.com/t/problem-confirmation-models/17833/6 "2021-04-13T18:28:31Z")

</div>

@xchrisd put together a [3D Print Guide](https://forum.snapmaker.com/t/3d-print-guide-walk-through/5945) with just such a list in Section 4. He even pre-generated GCode for some tests that require manually editting the GCode after slicing.

His guide is more aimed at dialing everything in ahead of time, rather than diagnosing after the fact. My prints have been much better since I went through it.

---

_[View the full topic](https://forum.snapmaker.com/t/problem-confirmation-models/17833)._