# Printing TPU with A250 (or any SM 2.0)

**URL:** <https://forum.snapmaker.com/t/printing-tpu-with-a250-or-any-sm-2-0/6217>\
**Category:** Snapmaker 2.0 (3-in-1)\
**Created:** [April 22, 2020, 2:37pm UTC](https://forum.snapmaker.com/t/printing-tpu-with-a250-or-any-sm-2-0/6217 "2020-04-22T14:37:54Z")\
**Posts on this page:** 1\
**Showing post:** 38

<div class="post-metadata">

**Author:** ![chazr33gtr](https://avatars.discourse-cdn.com/v4/letter/c/c77e96/32.png) [@chazr33gtr](https://forum.snapmaker.com/u/chazr33gtr)\
**Post date:** [July 6, 2020, 5:00pm UTC](https://forum.snapmaker.com/t/printing-tpu-with-a250-or-any-sm-2-0/6217/38 "2020-07-06T17:00:21Z")

</div>

@stevilg sure no probs… here it is… as one solid piece… and in two halves for easier printing[snapmaker\_flex\_feed\_adapter\_2\_halves.STL](https://forum.snapmaker.com/uploads/short-url/tqDdKpWLsB3O1PwOhlh6JkxzUY7.STL) (40.5 KB) [snapmaker\_flex\_feed\_adapter\_one\_piece.STL](https://forum.snapmaker.com/uploads/short-url/mQ6yVLzMgKjM0sQHJnqi5gZUWPr.STL) (38.4 KB)

---

_[View the full topic](https://forum.snapmaker.com/t/printing-tpu-with-a250-or-any-sm-2-0/6217)._