# Printing the U1 on the U1!

**URL:** <https://forum.snapmaker.com/t/printing-the-u1-on-the-u1/40169>\
**Category:** U1 Featured Showcase Collection\
**Created:** [October 13, 2025, 2:29pm UTC](https://forum.snapmaker.com/t/printing-the-u1-on-the-u1/40169 "2025-10-13T14:29:06Z")\
**Posts on this page:** 14\
**Page:** 1

<div class="post-metadata">

**Author:** ![Wombley](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/wombley/32/27838_2.png) [@Wombley](https://forum.snapmaker.com/u/Wombley)\
**Post date:** [October 13, 2025, 2:29pm UTC](https://forum.snapmaker.com/t/printing-the-u1-on-the-u1/40169/1 "2025-10-13T14:29:06Z")

</div>

For the backers, my fellow creative beta testers, and to Snapmaker. Let’s print the Snapmaker U1 on the Snapmaker U1!

 ![P_20251011_131853](https://us1.discourse-cdn.com/flex022/uploads/snapmaker/original/3X/f/9/f9658ae2018f8fc2860e66a254d6402f43de5baa.jpeg)

 ![P_20251011_131910](https://us1.discourse-cdn.com/flex022/uploads/snapmaker/original/3X/6/a/6a2d988ca92bbd28ae898509c47b180edab8dd67.jpeg)

 ![P_20251011_131937](https://us1.discourse-cdn.com/flex022/uploads/snapmaker/original/3X/4/b/4bf506eda509a5159bce86fb0ce103b42340dab4.jpeg)

Build video here, including build plate..:

[![](https://us1.discourse-cdn.com/flex022/uploads/snapmaker/original/3X/7/a/7adf9b19fa76609de679bb71c4d3acc1a073cbdb.jpeg "The Snapmaker U1 on the Snapmaker U1") ](https://www.youtube.com/watch?v=XJhN4Va8NqM)

[_This post/video are not sponsored. This print was done on a pre-production unit sent to me for community testing by Snapmaker. The final product and print results may differ._]

---

<div class="post-metadata">

**Author:** ![CadeFoster](https://avatars.discourse-cdn.com/v4/letter/c/ecc23a/32.png) [@CadeFoster](https://forum.snapmaker.com/u/CadeFoster)\
**Post date:** [October 13, 2025, 5:46pm UTC](https://forum.snapmaker.com/t/printing-the-u1-on-the-u1/40169/2 "2025-10-13T17:46:15Z")

</div>

@Wombley you are just the it man, this was so perfect to see the U1 make itself lol.

---

<div class="post-metadata">

**Author:** ![Pierre43](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/pierre43/32/32767_2.png) [@Pierre43](https://forum.snapmaker.com/u/Pierre43)\
**Post date:** [October 13, 2025, 6:47pm UTC](https://forum.snapmaker.com/t/printing-the-u1-on-the-u1/40169/3 "2025-10-13T18:47:09Z")

</div>

Is it Inception season 2 ?

Why isn’t there a small U1 inside the model ?

great job Wombley

---

<div class="post-metadata">

**Author:** ![ThomasDN](https://avatars.discourse-cdn.com/v4/letter/t/f9ae1b/32.png) [@ThomasDN](https://forum.snapmaker.com/u/ThomasDN)\
**Post date:** [October 15, 2025, 10:21am UTC](https://forum.snapmaker.com/t/printing-the-u1-on-the-u1/40169/4 "2025-10-15T10:21:51Z")

</div>

> **[Discord - Group Chat That’s All Fun & Games](https://discord.com/channels/1086575708903571536/1120624417215619223/1427890422147186848)**
>
> Discord is great for playing games and chilling with friends, or even building a worldwide community. Customize your own space to talk, play, and hang out.

 ![image](https://us1.discourse-cdn.com/flex022/uploads/snapmaker/original/3X/8/4/84e5e31441909bb4b0acc74f16f3bfef370193d1.jpeg)

---

<div class="post-metadata">

**Author:** ![Wombley](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/wombley/32/27838_2.png) [@Wombley](https://forum.snapmaker.com/u/Wombley)\
**Post date:** [October 15, 2025, 3:37pm UTC](https://forum.snapmaker.com/t/printing-the-u1-on-the-u1/40169/5 "2025-10-15T15:37:31Z")

</div>

Just came to post, lol…

By popular demand: A U1 in a U1 in a U1 in a U1 in a U1!😆

Note this was a very low-effort attempt for the laughs, just scaling the model in SM Orca and letting it fly. It’s “hairy” in spots as it was designed to print specifically at original scale, so certain defects came out from the model/slicing I didn’t bother addressing.

This was fun though, lol. All 3 of the smaller U1’s and their spools printed in a fraction of the time the original body did.

 ![U1-Printception](https://us1.discourse-cdn.com/flex022/uploads/snapmaker/original/3X/9/7/976668d49d890d6b23c69c009dc15d3a4bc02efb.jpeg)

The smallest one I just had to paint some pieces with everything joined because tiny features wouldn’t slice at all by default at this scale, lol… spools were fine though.

 ![Tiny-U1](https://us1.discourse-cdn.com/flex022/uploads/snapmaker/original/3X/b/1/b197bf811fd75c4b7b80e82bc175472dad3102c5.jpeg)

---

<div class="post-metadata">

**Author:** ![dwuk3d](https://avatars.discourse-cdn.com/v4/letter/d/e36b37/32.png) [@dwuk3d](https://forum.snapmaker.com/u/dwuk3d)\
**Post date:** [October 15, 2025, 4:08pm UTC](https://forum.snapmaker.com/t/printing-the-u1-on-the-u1/40169/6 "2025-10-15T16:08:17Z")

</div>

Excellent - all you now just need is one double size the real U1 - not sure how many parts would be required though - probably about 16 - so probably not really practical.

---

<div class="post-metadata">

**Author:** ![Wombley](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/wombley/32/27838_2.png) [@Wombley](https://forum.snapmaker.com/u/Wombley)\
**Post date:** [October 15, 2025, 4:28pm UTC](https://forum.snapmaker.com/t/printing-the-u1-on-the-u1/40169/7 "2025-10-15T16:28:32Z")

</div>

Yeah. If I’d chosen a slightly smaller scale for the original one I did, I could’ve done one at full print volume and squeezed out one more, hahaha. I checked though, and at full volume, the original model wouldn’t quite have fit inside it.

---

<div class="post-metadata">

**Author:** ![Pierre43](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/pierre43/32/32767_2.png) [@Pierre43](https://forum.snapmaker.com/u/Pierre43)\
**Post date:** [October 15, 2025, 7:00pm UTC](https://forum.snapmaker.com/t/printing-the-u1-on-the-u1/40169/8 "2025-10-15T19:00:07Z")

</div>

Great job @Wombley, you’ve done it !

---

<div class="post-metadata">

**Author:** ![mauker](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/mauker/32/30173_2.png) [@mauker](https://forum.snapmaker.com/u/mauker)\
**Post date:** [October 16, 2025, 10:50pm UTC](https://forum.snapmaker.com/t/printing-the-u1-on-the-u1/40169/9 "2025-10-16T22:50:15Z")

</div>

Awesome work! This is so funny hahaha

---

<div class="post-metadata">

**Author:** ![Gramps-Too](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/gramps-too/32/30364_2.png) [@Gramps-Too](https://forum.snapmaker.com/u/Gramps-Too)\
**Post date:** [October 21, 2025, 8:37pm UTC](https://forum.snapmaker.com/t/printing-the-u1-on-the-u1/40169/10 "2025-10-21T20:37:58Z")

</div>

That is definitely cool, great job @Wombley

---

<div class="post-metadata">

**Author:** ![fatboy1271](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/fatboy1271/32/31087_2.png) [@fatboy1271](https://forum.snapmaker.com/u/fatboy1271)\
**Post date:** [January 10, 2026, 6:01pm UTC](https://forum.snapmaker.com/t/printing-the-u1-on-the-u1/40169/11 "2026-01-10T18:01:59Z")

</div>

Wow, I’ll check this out later today! Super excited for this 🤘🤘

---

<div class="post-metadata">

**Author:** ![Wombley](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/wombley/32/27838_2.png) [@Wombley](https://forum.snapmaker.com/u/Wombley)\
**Post date:** [January 10, 2026, 10:20pm UTC](https://forum.snapmaker.com/t/printing-the-u1-on-the-u1/40169/12 "2026-01-10T22:20:14Z")

</div>

Oh wow, never posted it on this thread. But the model is up on Printables now also.

> **[Mini Snapmaker U1 by Wombley | Download free STL model | Printables.com](https://www.printables.com/model/1488755-mini-snapmaker-u1)**

> [@My mini U1 model now on Printables](https://forum.snapmaker.com/t/my-mini-u1-model-now-on-printables/40425):
>
> By popular demand (including from Snapmaker!), my miniature Snapmaker U1 model is now available on Printables: See the original post here:

---

<div class="post-metadata">

**Author:** ![fatboy1271](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/fatboy1271/32/31087_2.png) [@fatboy1271](https://forum.snapmaker.com/u/fatboy1271)\
**Post date:** [January 11, 2026, 7:08pm UTC](https://forum.snapmaker.com/t/printing-the-u1-on-the-u1/40169/13 "2026-01-11T19:08:22Z")

</div>

I finally watched the video… Fairly speechless… Any plans of a Design Workshop 😂🤘🤘

---

<div class="post-metadata">

**Author:** ![Simon\_Zhi](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/simon_zhi/32/30470_2.png) [@Simon\_Zhi](https://forum.snapmaker.com/u/Simon_Zhi)\
**Post date:** [January 12, 2026, 4:54am UTC](https://forum.snapmaker.com/t/printing-the-u1-on-the-u1/40169/14 "2026-01-12T04:54:31Z")

</div>

Pinned on January 12, 2026, 4:54am UTC


