# Printing PLA on Glass side of PEI plate

**URL:** <https://forum.snapmaker.com/t/printing-pla-on-glass-side-of-pei-plate/34520>\
**Category:** J1/J1s IDEX\
**Created:** [January 12, 2024, 8:19pm UTC](https://forum.snapmaker.com/t/printing-pla-on-glass-side-of-pei-plate/34520 "2024-01-12T20:19:23Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![pjaegerhh](https://avatars.discourse-cdn.com/v4/letter/p/3be4f8/32.png) [@pjaegerhh](https://forum.snapmaker.com/u/pjaegerhh)\
**Post date:** [January 12, 2024, 8:19pm UTC](https://forum.snapmaker.com/t/printing-pla-on-glass-side-of-pei-plate/34520/1 "2024-01-12T20:19:23Z")

</div>

Hi,  
might be a stupid question but is it possible to print PLA on the glass side of the PEI plate ? Print on PEI gives a super rough first layer. Or are there any other plates available ?

Thx 4 help!

---

<div class="post-metadata">

**Author:** ![TheBum](https://avatars.discourse-cdn.com/v4/letter/t/eada6e/32.png) [@TheBum](https://forum.snapmaker.com/u/TheBum)\
**Post date:** [January 12, 2024, 11:28pm UTC](https://forum.snapmaker.com/t/printing-pla-on-glass-side-of-pei-plate/34520/2 "2024-01-12T23:28:10Z")

</div>

I haven’t used the PEI side ever on my Artisan and the same should be true of the J1. You just have to add an adhesion agent to the bed, such as Elmer’s glue stick.

---

<div class="post-metadata">

**Author:** ![enbrakille](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/enbrakille/32/6583_2.png) [@enbrakille](https://forum.snapmaker.com/u/enbrakille)\
**Post date:** [January 14, 2024, 9:31am UTC](https://forum.snapmaker.com/t/printing-pla-on-glass-side-of-pei-plate/34520/3 "2024-01-14T09:31:23Z")

</div>

No glue needed at all! If z is adjusted properly it pops right of after bed cools. Perfect prints

---

<div class="post-metadata">

**Author:** ![Rwide](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/rwide/32/27055_2.png) [@Rwide](https://forum.snapmaker.com/u/Rwide)\
**Post date:** [January 14, 2024, 9:48am UTC](https://forum.snapmaker.com/t/printing-pla-on-glass-side-of-pei-plate/34520/4 "2024-01-14T09:48:20Z")

</div>

@pjaegerhh I recommend trying a polycarbonate sheet. It will give you a smooth first layer and great adhesion. Just remember to use sandpaper on the surface between prints…

---

<div class="post-metadata">

**Author:** ![TheBum](https://avatars.discourse-cdn.com/v4/letter/t/eada6e/32.png) [@TheBum](https://forum.snapmaker.com/u/TheBum)\
**Post date:** [January 15, 2024, 11:33pm UTC](https://forum.snapmaker.com/t/printing-pla-on-glass-side-of-pei-plate/34520/5 "2024-01-15T23:33:20Z")

</div>

I have issues with the corners lifting if I don’t use glue.

---

<div class="post-metadata">

**Author:** ![jimmychou1](https://avatars.discourse-cdn.com/v4/letter/j/958977/32.png) [@jimmychou1](https://forum.snapmaker.com/u/jimmychou1)\
**Post date:** [December 24, 2024, 5:11am UTC](https://forum.snapmaker.com/t/printing-pla-on-glass-side-of-pei-plate/34520/7 "2024-12-24T05:11:01Z")

</div>

When printing pla, it is indeed possible to print on the glass surface of PEI boards, as well as on glass boards and flexible platforms

---

<div class="post-metadata">

**Author:** ![MarkA121](https://avatars.discourse-cdn.com/v4/letter/m/e9bcb4/32.png) [@MarkA121](https://forum.snapmaker.com/u/MarkA121)\
**Post date:** [January 10, 2025, 1:13am UTC](https://forum.snapmaker.com/t/printing-pla-on-glass-side-of-pei-plate/34520/8 "2025-01-10T01:13:34Z")

</div>

I generally use the smooth side with hairspray for printing with ASA/HIPS. When I print PLA on the same surface, it sticks _really_ well. It’s sometimes hard to get the finished print off, even after letting the plate cool.
