# Printer bed frame 3d Object **URL:** \ **Category:** Snapmaker 2.0 (3-in-1)\ **Created:** [January 4, 2021, 9:41am UTC](https://forum.snapmaker.com/t/printer-bed-frame-3d-object/13910 "2021-01-04T09:41:28Z")\ **Posts on this page:** 1\ **Showing post:** 2
**Author:** ![Slynold](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/slynold/32/7931_2.png) [@Slynold](https://forum.snapmaker.com/u/Slynold)\ **Post date:** [January 4, 2021, 9:44am UTC](https://forum.snapmaker.com/t/printer-bed-frame-3d-object/13910/2 "2021-01-04T09:44:09Z")
Found it: > [@Carriage Tolerances - Unusable Over Distance \>75mm From Center](https://forum.snapmaker.com/t/carriage-tolerances-unusable-over-distance-75mm-from-center/10706/39): > > With all that frustration with bumping of linear modules and tolerance, I decided to CNC a new frame(mounting platform). I want to make shim parts with a bigger radius, it could help with flatness of mounting «beds». 16mm vs original 10mm. I also want to make more connection points between frame and linear modules for vibration damping between them, so I added a few holes to design. So i hope with a new frame and new linear module i can reach better results with my A350. Or not. I start thinki… Closed --- _[View the full topic](https://forum.snapmaker.com/t/printer-bed-frame-3d-object/13910)._