# Print head, print heater tube

**URL:** <https://forum.snapmaker.com/t/print-head-print-heater-tube/33675>\
**Category:** Original (3-in-1)\
**Created:** [November 18, 2023, 4:41am UTC](https://forum.snapmaker.com/t/print-head-print-heater-tube/33675 "2023-11-18T04:41:04Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![StuPrintsCrap](https://avatars.discourse-cdn.com/v4/letter/s/779978/32.png) [@StuPrintsCrap](https://forum.snapmaker.com/u/StuPrintsCrap)\
**Post date:** [November 18, 2023, 4:41am UTC](https://forum.snapmaker.com/t/print-head-print-heater-tube/33675/1 "2023-11-18T04:41:04Z")

</div>

Hey Print family, I have accidentally destroyed my print heads due to over heating because of a crash, the little white tube is no longer any good, does anyone know where I could source replacement tubes? Thank you in advance, I have looked everywhere and to date not you found any information.

---

<div class="post-metadata">

**Author:** ![xchrisd](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/xchrisd/32/1503_2.png) [@xchrisd](https://forum.snapmaker.com/u/xchrisd)\
**Post date:** [November 19, 2023, 8:18pm UTC](https://forum.snapmaker.com/t/print-head-print-heater-tube/33675/2 "2023-11-19T20:18:15Z")

</div>

You have to look for ptfe tube. Inner diameter should be about 1.75mm.