# Prime Tower always falls over

**URL:** <https://forum.snapmaker.com/t/prime-tower-always-falls-over/32250>\
**Category:** Snapmaker 2.0 (3-in-1)\
**Created:** [July 22, 2023, 11:04pm UTC](https://forum.snapmaker.com/t/prime-tower-always-falls-over/32250 "2023-07-22T23:04:23Z")\
**Posts on this page:** 10\
**Page:** 1

<div class="post-metadata">

**Author:** ![MasterofBytes](https://avatars.discourse-cdn.com/v4/letter/m/58f4c7/32.png) [@MasterofBytes](https://forum.snapmaker.com/u/MasterofBytes)\
**Post date:** [July 22, 2023, 11:04pm UTC](https://forum.snapmaker.com/t/prime-tower-always-falls-over/32250/1 "2023-07-22T23:04:23Z")

</div>

Whenever I use the prime tower it always falls over in the middle of a print and makes a mess. Does anyone have an idea as to how to fix this?

---

<div class="post-metadata">

**Author:** ![Wyphorn](https://avatars.discourse-cdn.com/v4/letter/w/ebca7d/32.png) [@Wyphorn](https://forum.snapmaker.com/u/Wyphorn)\
**Post date:** [July 22, 2023, 11:25pm UTC](https://forum.snapmaker.com/t/prime-tower-always-falls-over/32250/2 "2023-07-22T23:25:01Z")

</div>

Hi MasterofBytes,  
Try bigger tower brim, bigger min size (Luban: Prime Tower Minimum Volume), bigger tower diameter (by hand, like scale an object). 🙋

---

<div class="post-metadata">

**Author:** ![Rwide](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/rwide/32/27055_2.png) [@Rwide](https://forum.snapmaker.com/u/Rwide)\
**Post date:** [July 22, 2023, 11:29pm UTC](https://forum.snapmaker.com/t/prime-tower-always-falls-over/32250/3 "2023-07-22T23:29:50Z")

</div>

I agree with what @Wyphorn said. Bigger brim is probably most important. In addition you can also:

Increase bed temp  
Decrease the z-offset  
Make sure the bed is clean

---

<div class="post-metadata">

**Author:** ![clewis](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/clewis/32/3255_2.png) [@clewis](https://forum.snapmaker.com/u/clewis)\
**Post date:** [July 25, 2023, 12:15am UTC](https://forum.snapmaker.com/t/prime-tower-always-falls-over/32250/4 "2023-07-25T00:15:49Z")

</div>

Also try turning on ZHop when retracted. That will lift the nozzle a bit, so it’s less likely to impact objects when moving on to them.

---

<div class="post-metadata">

**Author:** ![Mads0100](https://avatars.discourse-cdn.com/v4/letter/m/4af34b/32.png) [@Mads0100](https://forum.snapmaker.com/u/Mads0100)\
**Post date:** [August 6, 2023, 5:33am UTC](https://forum.snapmaker.com/t/prime-tower-always-falls-over/32250/5 "2023-08-06T05:33:53Z")

</div>

Increase the volume to like 23mm3.

---

<div class="post-metadata">

**Author:** ![cbardon](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/cbardon/32/6204_2.png) [@cbardon](https://forum.snapmaker.com/u/cbardon)\
**Post date:** [September 4, 2023, 6:49pm UTC](https://forum.snapmaker.com/t/prime-tower-always-falls-over/32250/6 "2023-09-04T18:49:25Z")

</div>

I’ve been having the same problem. Anything above maybe 40mm and the prime tower falls over, and my prints are a mess. Trying a print now with the prime tower disabled to see what happens.

Is there a way to add a raft to the prime tower? That’s normally what I’d do when printing something that shape, so it would probably help here.

---

<div class="post-metadata">

**Author:** ![StepDan](https://avatars.discourse-cdn.com/v4/letter/s/8c91f0/32.png) [@StepDan](https://forum.snapmaker.com/u/StepDan)\
**Post date:** [August 27, 2024, 12:33am UTC](https://forum.snapmaker.com/t/prime-tower-always-falls-over/32250/7 "2024-08-27T00:33:27Z")

</div>

How did it go without a prime tower?

---

<div class="post-metadata">

**Author:** ![MasterofBytes](https://avatars.discourse-cdn.com/v4/letter/m/58f4c7/32.png) [@MasterofBytes](https://forum.snapmaker.com/u/MasterofBytes)\
**Post date:** [August 27, 2024, 1:12am UTC](https://forum.snapmaker.com/t/prime-tower-always-falls-over/32250/8 "2024-08-27T01:12:57Z")

</div>

I never use the prime tower anymore. It’s a waste of material. Prints work just fine without it.

---

<div class="post-metadata">

**Author:** ![dgatwood](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/dgatwood/32/19596_2.png) [@dgatwood](https://forum.snapmaker.com/u/dgatwood)\
**Post date:** [May 11, 2025, 12:21am UTC](https://forum.snapmaker.com/t/prime-tower-always-falls-over/32250/9 "2025-05-11T00:21:15Z")

</div>

Even with a 36 mm^2 prime tower and a raft, it is falling over mid-print reliably for me now, approximately 100% of the time. It breaks loose at the bottom, i.e. there is inadequate adhesion.

Printing PETG with Breakway PLA as the adhesion layer. Works fine for the print, fails for the tower. Even tried telling it to add cross bracing.

There is clearly something _very_ flawed about the way it is constructed. I’m turning it back off. What I don’t get is why they don’t just add a "crash the print head into an unused part of the bed) nozzle wipe mode. 🙂

---

<div class="post-metadata">

**Author:** ![Wyphorn](https://avatars.discourse-cdn.com/v4/letter/w/ebca7d/32.png) [@Wyphorn](https://forum.snapmaker.com/u/Wyphorn)\
**Post date:** [May 11, 2025, 5:07am UTC](https://forum.snapmaker.com/t/prime-tower-always-falls-over/32250/10 "2025-05-11T05:07:52Z")

</div>

Yeah. Or add some brush. I have also problems with high prime towers
