# Portrait On Maple

**URL:** <https://forum.snapmaker.com/t/portrait-on-maple/26852>\
**Category:** Showcase & Prints\
**Created:** [July 28, 2022, 10:45am UTC](https://forum.snapmaker.com/t/portrait-on-maple/26852 "2022-07-28T10:45:54Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Skreelink](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/skreelink/32/16398_2.png) [@Skreelink](https://forum.snapmaker.com/u/Skreelink)\
**Post date:** [July 28, 2022, 10:45am UTC](https://forum.snapmaker.com/t/portrait-on-maple/26852/1 "2022-07-28T10:45:54Z")

</div>

Co-worker of mine is a big fan of Billy Strings, so I figured I’d do up this for him.

12x12 Maple plywood, 10W laser, greyscale @ 5-75% power, 0.14 interval, 2000mm/m about 5.5 hours. First time trying one with a real face, not too bad.

 ![PXL_20220728_084310015](https://us1.discourse-cdn.com/flex022/uploads/snapmaker/original/3X/2/f/2fec891b2fd991651385b7853bc673a706bc3e4e.jpeg)

---

<div class="post-metadata">

**Author:** ![fatman](https://avatars.discourse-cdn.com/v4/letter/f/d2c977/32.png) [@fatman](https://forum.snapmaker.com/u/fatman)\
**Post date:** [August 1, 2022, 5:33pm UTC](https://forum.snapmaker.com/t/portrait-on-maple/26852/2 "2022-08-01T17:33:03Z")

</div>

Did you use Lightburn for this one?

---

<div class="post-metadata">

**Author:** ![Skreelink](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/skreelink/32/16398_2.png) [@Skreelink](https://forum.snapmaker.com/u/Skreelink)\
**Post date:** [August 1, 2022, 6:50pm UTC](https://forum.snapmaker.com/t/portrait-on-maple/26852/3 "2022-08-01T18:50:42Z")

</div>

Yes, I used lightburn for it.
