# Plateau qui oscille !?

**URL:** <https://forum.snapmaker.com/t/plateau-qui-oscille/21987>\
**Category:** Snapmaker 2.0 (3-in-1)\
**Created:** [November 14, 2021, 1:51pm UTC](https://forum.snapmaker.com/t/plateau-qui-oscille/21987 "2021-11-14T13:51:24Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![ElloryJaye](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/elloryjaye/32/13979_2.png) [@ElloryJaye](https://forum.snapmaker.com/u/ElloryJaye)\
**Post date:** [November 14, 2021, 9:08pm UTC](https://forum.snapmaker.com/t/plateau-qui-oscille/21987/2 "2021-11-14T21:08:24Z")

</div>

Comme ça?

> [@Minimize rocking](https://forum.snapmaker.com/t/minimize-rocking/19215):
>
> I’ve noticed that when I have prints that go close to the front edge, and especially with fill operations that have front to back movements, the edge of the plate can rock at least a millimetre vertically, possibly more. As a result, I see less precision on the print in that area and more issues with the first layer adhering mostly near the corners. I’m on an A350 which probably exaggerates the issue with the larger sized plate. Anyone have any tips or DIY tweaks to make the plate a little mor…

---

_[View the full topic](https://forum.snapmaker.com/t/plateau-qui-oscille/21987)._