# Bicolor PLA

**URL:** <https://forum.snapmaker.com/t/pla-bicouleur/42213>\
**Category:** U1 Toolchanger\
**Created:** [June 10, 2026, 3:41pm UTC](https://forum.snapmaker.com/t/pla-bicouleur/42213 "2026-06-10T15:41:39Z")\
**Posts on this page:** 1\
**Showing post:** 3

<div class="post-metadata">

**Author:** ![CrazyIvan](https://avatars.discourse-cdn.com/v4/letter/c/7bcc69/32.png) [@CrazyIvan](https://forum.snapmaker.com/u/CrazyIvan)\
**Post date:** [June 11, 2026, 8:55am UTC](https://forum.snapmaker.com/t/pla-bicouleur/42213/3 "2026-06-11T08:55:32Z")

</div>

Depends what you mean. If you’re talking about feeding different colours to two or more print heads, see the Full Spectrum thread [Getting Started with Full Spectrum Slicing](https://forum.snapmaker.com/t/getting-started-with-full-spectrum-slicing/42105)

If you mean using the muti-coloured filament, there’s nothing you can do to control that. You just print with it as if it were one colour, and take what you get.

---

_[View the full topic](https://forum.snapmaker.com/t/pla-bicouleur/42213)._