# PCB using Snapmaker A350

**URL:** <https://forum.snapmaker.com/t/pcb-using-snapmaker-a350/31387>\
**Category:** Snapmaker 2.0 (3-in-1)\
**Tags:** Snapmaker\_Luban\
**Created:** [May 15, 2023, 8:23pm UTC](https://forum.snapmaker.com/t/pcb-using-snapmaker-a350/31387 "2023-05-15T20:23:50Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![shazia](https://avatars.discourse-cdn.com/v4/letter/s/f4b2a3/32.png) [@shazia](https://forum.snapmaker.com/u/shazia)\
**Post date:** [May 15, 2023, 8:23pm UTC](https://forum.snapmaker.com/t/pcb-using-snapmaker-a350/31387/1 "2023-05-15T20:23:50Z")

</div>

I am trying to make a PCB using Snapmaker 2.0 A350 on a copper fiber board (copper thickness 2oz, PCB thickness 16mm). I am using a straight groove 0.3mm bit.  
I’m having trouble calibrating the machine (i have broken two bits so far while manually setting the work origin .-.)  
Also, has anyone used Snapmaker and Luban for pcb printing? The pcb is taking forever to make. I’m testing printing a pcb of 2x2 inches, with two 1x3 headers and a plain routing track and even that is taking more than 4hrs. Not sure what I’m doing wrong  
My work speed is 80mm/min  
Plunge speed 40mm/min  
Step down 0.25  
Step over 0.04

Can anyone please help me with this? Can’t quite figure out what I’m doing wrong

---

<div class="post-metadata">

**Author:** ![nweolu](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/nweolu/32/23079_2.png) [@nweolu](https://forum.snapmaker.com/u/nweolu)\
**Post date:** [May 16, 2023, 9:26am UTC](https://forum.snapmaker.com/t/pcb-using-snapmaker-a350/31387/2 "2023-05-16T09:26:25Z")

</div>

There is a writeup in the list about pcb milling - [GitHub - shurushetr/awesome-snapmaker: Curated list of things that help you make something awesome with Snapmaker machines.](https://github.com/shurushetr/awesome-snapmaker)
