# Orca Customer Filament Colors

**URL:** <https://forum.snapmaker.com/t/orca-customer-filament-colors/43331>\
**Category:** Feature Request\
**Created:** [September 10, 2026, 8:59pm UTC](https://forum.snapmaker.com/t/orca-customer-filament-colors/43331 "2026-09-10T20:59:07Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![OLAT](https://avatars.discourse-cdn.com/v4/letter/o/edb3f5/32.png) [@OLAT](https://forum.snapmaker.com/u/OLAT)\
**Post date:** [September 10, 2026, 8:59pm UTC](https://forum.snapmaker.com/t/orca-customer-filament-colors/43331/1 "2026-09-10T20:59:07Z")

</div>

So this may seem obvious but. Why can’t I set a custom color for my filament? I print some items with colors that are very similar but not the same. So I am forced into setting say bright orange and tan in place of a light and dark brown(not a perfect example but you get the idea) and it’s small but important.

---

<div class="post-metadata">

**Author:** ![Zoe\_M](https://avatars.discourse-cdn.com/v4/letter/z/8491ac/32.png) [@Zoe\_M](https://forum.snapmaker.com/u/Zoe_M)\
**Post date:** [September 15, 2026, 12:16pm UTC](https://forum.snapmaker.com/t/orca-customer-filament-colors/43331/2 "2026-09-15T12:16:27Z")

</div>

hi, have you tried to set custom colours here:

 ![621cf68e-b42d-4b1f-8450-174316d1ff83](https://us1.discourse-cdn.com/flex022/uploads/snapmaker/original/3X/a/b/ab4c955401fe55b7ac6a431308ac94dcae2a1c73.jpeg)