# On achieving a perfect level **URL:** \ **Category:** Snapmaker 2.0 (3-in-1)\ **Created:** [February 27, 2020, 6:17am UTC](https://forum.snapmaker.com/t/on-achieving-a-perfect-level/5440 "2020-02-27T06:17:38Z")\ **Posts on this page:** 1\ **Showing post:** 197
**Author:** ![brent113](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/brent113/32/11114_2.png) [@brent113](https://forum.snapmaker.com/u/brent113)\ **Post date:** [October 9, 2020, 2:47am UTC](https://forum.snapmaker.com/t/on-achieving-a-perfect-level/5440/197 "2020-10-09T02:47:15Z")
Yes, see this topic. It’s not a single command, but many commands that the screen issues, all of which need to be run in order. > [@How to do a larger than 3 x 3 matrix level](https://forum.snapmaker.com/t/how-to-do-a-larger-than-3-x-3-matrix-level/5727): > > So here’s my attempt at doing a leveling matrix larger than 3 x 3. Please be advised that this is not for the faint of heart. If you mess up this process you can bury your nozzle into your print surface. I know, I did. I’ll try and tell you how to avoid that. If you aren’t having any trouble with the first layer of printing then this process isn’t for you. I am doing this on an A250, so you may have to change some things for your size Snapmaker. The controller has a version of leveling that the… --- _[View the full topic](https://forum.snapmaker.com/t/on-achieving-a-perfect-level/5440)._