# On achieving a perfect level

**URL:** <https://forum.snapmaker.com/t/on-achieving-a-perfect-level/5440>\
**Category:** Snapmaker 2.0 (3-in-1)\
**Created:** [February 27, 2020, 6:17am UTC](https://forum.snapmaker.com/t/on-achieving-a-perfect-level/5440 "2020-02-27T06:17:38Z")\
**Posts on this page:** 1\
**Showing post:** 161

<div class="post-metadata">

**Author:** ![xchrisd](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/xchrisd/32/1503_2.png) [@xchrisd](https://forum.snapmaker.com/u/xchrisd)\
**Post date:** [May 1, 2020, 11:50am UTC](https://forum.snapmaker.com/t/on-achieving-a-perfect-level/5440/161 "2020-05-01T11:50:17Z")

</div>

Finally I got it. Tweaking the last 0.02mm is hard work. I did this printing calibration sheets with 0.2mm height, 3outlines.

 ![IMG_20200501_133934](https://us1.discourse-cdn.com/flex022/uploads/snapmaker/original/2X/0/00928c49cf5a33e737ba3eda1002aace677f19b5.jpeg)

BTW,- if i print branches the first layer speed has to be slow, anyways. now printing with 8-10mm-s instead of 3mm-s at worse bed calibration.

---

_[View the full topic](https://forum.snapmaker.com/t/on-achieving-a-perfect-level/5440)._