# OctoPrint with the Snapmaker J1 / settings and help **URL:** \ **Category:** J1/J1s IDEX\ **Created:** [February 11, 2023, 3:26pm UTC](https://forum.snapmaker.com/t/octoprint-with-the-snapmaker-j1-settings-and-help/29551 "2023-02-11T15:26:59Z")\ **Posts on this page:** 1\ **Showing post:** 7
**Author:** ![xchrisd](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/xchrisd/32/1503_2.png) [@xchrisd](https://forum.snapmaker.com/u/xchrisd)\ **Post date:** [February 12, 2023, 12:14pm UTC](https://forum.snapmaker.com/t/octoprint-with-the-snapmaker-j1-settings-and-help/29551/7 "2023-02-12T12:14:31Z")
> [@i3sven](#): > > Then this should fit here…? Yes. > [@i3sven](#): > > remotely maintain OctoPrint without these paid plugins Not sure what you mean. Never saw a paid plugin for octoprint. I look at my octoprint via dynamic dns which is set in my router. I use no-ip for free hosting my octoprint. > **[No-IP: Verwenden Sie Remote-Zugriff und DDNS, um von überall und jederzeit...](https://www.noip.com/de-DE/remote-access)** > > Remote access your computer, DVR, webcam, security camera or any internet connected device easily. Dynamic DNS > points an easy to remember hostname to your dynamic IP address. There are many forum threads about octoprint, have fun at reading 😉 > [@\[GUIDE\] Octoprint on Snapmaker Original](https://forum.snapmaker.com/t/guide-octoprint-on-snapmaker-original/23393): > > I noticed that there’s no guide specifically for setting up octoprint on the original snapmaker here. I’ve done this for my A350, and just got an original, so I figured I’d put one together since there were a few things I had to look up in the process. The process is relatively simple, most of what you need was already included with the machine. NOTE: This setup will take you through a few things before connecting your machine, we’ll first want set up octoprint, and only connect to the machin… > [@Full Octoprint + Cura Setup](https://forum.snapmaker.com/t/full-octoprint-cura-setup/26875): > > Hi =) I’m very new to 3D printingn and love the snapmaker! But I hate Luban and I do’nt quite like the Software from Snapmaker itself for 3D printing (For Lasering it seems to be OK) Thats why I changed to Ultimaker Cura and Octoprint, which enchanced the Quality of the Prints, and lowered the Time to set them up! I really like it! I started this thread to open a discussion how to Setup Snapmaker with Octoprint and Cura, what I have done till now, and what is still WIP, and whrere I possibly ne… Use the search for more 👍 --- _[View the full topic](https://forum.snapmaker.com/t/octoprint-with-the-snapmaker-j1-settings-and-help/29551)._