# Nozzle Tempeatures

**URL:** <https://forum.snapmaker.com/t/nozzle-tempeatures/14123>\
**Category:** Snapmaker 2.0 (3-in-1)\
**Created:** [January 8, 2021, 7:49pm UTC](https://forum.snapmaker.com/t/nozzle-tempeatures/14123 "2021-01-08T19:49:51Z")\
**Posts on this page:** 1\
**Showing post:** 4

<div class="post-metadata">

**Author:** ![zauguin](https://avatars.discourse-cdn.com/v4/letter/z/c89c15/32.png) [@zauguin](https://forum.snapmaker.com/u/zauguin)\
**Post date:** [January 8, 2021, 8:43pm UTC](https://forum.snapmaker.com/t/nozzle-tempeatures/14123/4 "2021-01-08T20:43:05Z")

</div>

@stefix Have you seen [Calibrate Hot End Thermistor](https://forum.snapmaker.com/t/calibrate-hot-end-thermistor/14036)? The numbers there seem roughly similar… Anyway could you send me the table in a processable format, I want to do some curve fitting?

---

_[View the full topic](https://forum.snapmaker.com/t/nozzle-tempeatures/14123)._