# Nozzle clogged to the Extreme

**URL:** <https://forum.snapmaker.com/t/nozzle-clogged-to-the-extreme/28263>\
**Category:** Snapmaker 2.0 (3-in-1)\
**Created:** [December 9, 2022, 3:27pm UTC](https://forum.snapmaker.com/t/nozzle-clogged-to-the-extreme/28263 "2022-12-09T15:27:34Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![captain118](https://avatars.discourse-cdn.com/v4/letter/c/58956e/32.png) [@captain118](https://forum.snapmaker.com/u/captain118)\
**Post date:** [December 9, 2022, 3:27pm UTC](https://forum.snapmaker.com/t/nozzle-clogged-to-the-extreme/28263/1 "2022-12-09T15:27:34Z")

</div>

Well I’ve had better days. This thing is rock solid. Like a brick. I tried to heat up the head to see if I could break it off but then I noticed that its encasing a wire. So I’ve got to be more gentile. I’m going to try a heat gun.

Any other suggestions/condolences/commiserations?

 ![PXL_20221209_145219957.MP](https://us1.discourse-cdn.com/flex022/uploads/snapmaker/original/3X/6/2/6235e96509ffa9437c980441c086a174e6606d9d.jpeg)  
 ![PXL_20221209_145800944.MP](https://us1.discourse-cdn.com/flex022/uploads/snapmaker/original/3X/5/8/585a7738222c1d219faf3f46888771a6a61da70a.jpeg)

---

<div class="post-metadata">

**Author:** ![snapUser](https://avatars.discourse-cdn.com/v4/letter/s/e19b73/32.png) [@snapUser](https://forum.snapmaker.com/u/snapUser)\
**Post date:** [December 9, 2022, 4:37pm UTC](https://forum.snapmaker.com/t/nozzle-clogged-to-the-extreme/28263/2 "2022-12-09T16:37:44Z")

</div>

Not worth the time and effort IMO. Good reason to keep a spare print module on hand, while you try to clean that one up. Good luck!

---

<div class="post-metadata">

**Author:** ![ElloryJaye](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/elloryjaye/32/13979_2.png) [@ElloryJaye](https://forum.snapmaker.com/u/ElloryJaye)\
**Post date:** [December 10, 2022, 10:21pm UTC](https://forum.snapmaker.com/t/nozzle-clogged-to-the-extreme/28263/3 "2022-12-10T22:21:43Z")

</div>

Alas, the Monster Blob is a not-uncommon rite of passage with the Snapmaker. Some people _have_ succeeded in freeing one up with a heat gun, at the cost of a slightly warped fan shroud. If you can get enough of it off to pull out the hot end assembly, you have a chance. Best of luck.

---

<div class="post-metadata">

**Author:** ![squirt](https://avatars.discourse-cdn.com/v4/letter/s/58956e/32.png) [@squirt](https://forum.snapmaker.com/u/squirt)\
**Post date:** [December 19, 2022, 4:05am UTC](https://forum.snapmaker.com/t/nozzle-clogged-to-the-extreme/28263/4 "2022-12-19T04:05:44Z")

</div>

My fan shrouds were destroyed and completely filled with nylon.i would upload photos but I’m new. So instead… [Snapmaker 2.0 disaster part 3 - YouTube](https://youtube.com/shorts/pGqM8AgRHb8?feature=share)

And then, [snapmaker 2.0 disaster part 4 - YouTube](https://youtu.be/MZlmd3JMpZAthe) small fan is also unsalvaggeable. Snapmaker sent me a new m.dule but thefilament runout switch doesn’t work