# Nichts funktioniert **URL:** \ **Category:** Snapmaker 2.0 (3-in-1)\ **Created:** [November 5, 2022, 3:55pm UTC](https://forum.snapmaker.com/t/nichts-funktioniert/27762 "2022-11-05T15:55:26Z")\ **Posts on this page:** 9\ **Page:** 1
**Author:** ![NaWo](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/nawo/32/19659_2.png) [@NaWo](https://forum.snapmaker.com/u/NaWo)\ **Post date:** [November 5, 2022, 3:55pm UTC](https://forum.snapmaker.com/t/nichts-funktioniert/27762/1 "2022-11-05T15:55:26Z")
Alles zusammengebaut, 3 mal kontrolliert! Netzteil eingeschaltet, nichts geht! Strom kontrolliert, i.o. Modell snapmaker A350T! ---
**Author:** ![bobby4718](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/bobby4718/32/11627_2.png) [@bobby4718](https://forum.snapmaker.com/u/bobby4718)\ **Post date:** [November 5, 2022, 4:38pm UTC](https://forum.snapmaker.com/t/nichts-funktioniert/27762/2 "2022-11-05T16:38:22Z")
Could you add more specifics? By nothing works, do you mean that machine doesn’t move? That the touchscreen doesn’t turn on? Do the power supply’s lights turn on? A better description and/or pictures would help with troubleshooting. Also, in the future, your machine would fall under the “Snapmaker 2.0” category, not the “Snapmaker Original” category. ---
**Author:** ![NaWo](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/nawo/32/19659_2.png) [@NaWo](https://forum.snapmaker.com/u/NaWo)\ **Post date:** [November 6, 2022, 5:39pm UTC](https://forum.snapmaker.com/t/nichts-funktioniert/27762/3 "2022-11-06T17:39:53Z")
Danke für Ihre Antwort. Habe den Fehler gefunden ! Danke auch für den Tip Snapmaker 2.0! Liebe Grüße ---
**Author:** ![alex2](https://avatars.discourse-cdn.com/v4/letter/a/45deac/32.png) [@alex2](https://forum.snapmaker.com/u/alex2)\ **Post date:** [November 21, 2022, 6:37pm UTC](https://forum.snapmaker.com/t/nichts-funktioniert/27762/4 "2022-11-21T18:37:47Z")
Hello, I have kind of the same Problem. The screen does not work. I tested what would happen if I plug the screen alone into my pc. It boots and then obviously says that the machine is not reacting. Though if I plug it into to the controller box it just boots shows the ‘s’ for a couple seconds and then just turns black and nothing happens. But I can control the printer via pc even though the screen does not work. Thats why I assume that the port for the screen on the controller box is broken even though it’s ‘breathing’. I also mesured the voltages that the power supply outputs. They are all fine. ---
**Author:** ![alex2](https://avatars.discourse-cdn.com/v4/letter/a/45deac/32.png) [@alex2](https://forum.snapmaker.com/u/alex2)\ **Post date:** [November 21, 2022, 6:40pm UTC](https://forum.snapmaker.com/t/nichts-funktioniert/27762/5 "2022-11-21T18:40:47Z")
Hallo, könntest du mir sagen was du gemach hast? ---
**Author:** ![NaWo](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/nawo/32/19659_2.png) [@NaWo](https://forum.snapmaker.com/u/NaWo)\ **Post date:** [November 21, 2022, 8:43pm UTC](https://forum.snapmaker.com/t/nichts-funktioniert/27762/6 "2022-11-21T20:43:04Z")
Hi David, der Nullleiter in der Steckdose war schlecht montiert 🥴 Holen Sie sich [Outlook für iOS](https://aka.ms/o0ukef) ---
**Author:** ![ElloryJaye](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/elloryjaye/32/13979_2.png) [@ElloryJaye](https://forum.snapmaker.com/u/ElloryJaye)\ **Post date:** [November 21, 2022, 8:43pm UTC](https://forum.snapmaker.com/t/nichts-funktioniert/27762/7 "2022-11-21T20:43:21Z")
1. Replying to a closed thread isn’t a good way to get answers. Next time, start your own thread. 2. Leave the screen on for a generous amount of time before you declare it “dead”—this isn’t a fast-booting system. 3. If you really, honestly think you have a hardware issue, contact [support@snapmaker.com](mailto:support@snapmaker.com) . They are the only source of many replacement parts. ---
**Author:** ![alex2](https://avatars.discourse-cdn.com/v4/letter/a/45deac/32.png) [@alex2](https://forum.snapmaker.com/u/alex2)\ **Post date:** [November 22, 2022, 1:05pm UTC](https://forum.snapmaker.com/t/nichts-funktioniert/27762/8 "2022-11-22T13:05:18Z")
Danke, habe alles nochmal überprüft. Funktioniert leider immer noch nicht. ---
**Author:** ![xchrisd](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/xchrisd/32/1503_2.png) [@xchrisd](https://forum.snapmaker.com/u/xchrisd)\ **Post date:** [November 24, 2022, 6:56pm UTC](https://forum.snapmaker.com/t/nichts-funktioniert/27762/9 "2022-11-24T18:56:34Z")
Here is my response to your own thread, please post only one time per topic. > [@Screen turns on show S and turns off](https://forum.snapmaker.com/t/screen-turns-on-show-s-and-turns-off/27977/2): > > You have to email support if you need a replacement. It should be possible to connect the hmi touchscreen to another usb port with an adapter usb-a to usb-c, it would work the same way like the usb-c port should do.