# New Snapmaker J1, 1 month experience and review (cooler mod and speedbench run)

**URL:** <https://forum.snapmaker.com/t/new-snapmaker-j1-1-month-experience-and-review-cooler-mod-and-speedbench-run/34708>\
**Category:** J1/J1s IDEX\
**Tags:** Accessories, 3D\_Models\
**Created:** [January 27, 2024, 6:13pm UTC](https://forum.snapmaker.com/t/new-snapmaker-j1-1-month-experience-and-review-cooler-mod-and-speedbench-run/34708 "2024-01-27T18:13:32Z")\
**Posts on this page:** 1\
**Showing post:** 10

<div class="post-metadata">

**Author:** ![xchrisd](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/xchrisd/32/1503_2.png) [@xchrisd](https://forum.snapmaker.com/u/xchrisd)\
**Post date:** [March 24, 2024, 6:16pm UTC](https://forum.snapmaker.com/t/new-snapmaker-j1-1-month-experience-and-review-cooler-mod-and-speedbench-run/34708/10 "2024-03-24T18:16:13Z")

</div>

Normal work flow would be to send the gcode to the machine through Luban or alternative ways like here:

> [@File Transfer via WiFi](https://forum.snapmaker.com/t/file-transfer-via-wifi/5270/64):
>
> I’ve released a command line tool that you can easily use to find devices and upload your gcode as well as .nc, .bin (yes you can upload the firmware bin) I’m also adding feature to support J1 & Artisan.

I would suggest to print from the touchscreen to avoid connection lost through wifi connection.  
There is also a Cura plug in for directly sending to the machine I guess…

Wifi connection from other programs does not work for directly printing (yet and I am not sure), you have to use Luban workspace if you want to use this option.

---

_[View the full topic](https://forum.snapmaker.com/t/new-snapmaker-j1-1-month-experience-and-review-cooler-mod-and-speedbench-run/34708)._