# Need help bridging with PETG

**URL:** <https://forum.snapmaker.com/t/need-help-bridging-with-petg/25587>\
**Category:** Snapmaker 2.0 (3-in-1)\
**Created:** [April 30, 2022, 6:48pm UTC](https://forum.snapmaker.com/t/need-help-bridging-with-petg/25587 "2022-04-30T18:48:09Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![MiracleMike](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/miraclemike/32/6600_2.png) [@MiracleMike](https://forum.snapmaker.com/u/MiracleMike)\
**Post date:** [April 30, 2022, 6:48pm UTC](https://forum.snapmaker.com/t/need-help-bridging-with-petg/25587/1 "2022-04-30T18:48:09Z")

</div>

Hi guys,  
I’m trying PETG but I can’t figure out how to get it right. Here is one of my Temp tower. How can I fix the bridging? Any tip for Cura ?

Polymaker Polylite PETG  
Layer height: 0.2mm  
Print Speed 50mm/s  
Fan 100%

Thanks

 ![IMG_0212](https://us1.discourse-cdn.com/flex022/uploads/snapmaker/original/3X/f/4/f4e308c9373e31d9af307243d773e39783d638e3.jpeg)  
 ![IMG_0213](https://us1.discourse-cdn.com/flex022/uploads/snapmaker/original/3X/8/8/88a9c12032bfd011e29590a42242463e4c6e974a.jpeg)