# My first layers bends on bed

**URL:** <https://forum.snapmaker.com/t/my-first-layers-bends-on-bed/16445>\
**Category:** Snapmaker 2.0 (3-in-1)\
**Created:** [March 1, 2021, 10:27am UTC](https://forum.snapmaker.com/t/my-first-layers-bends-on-bed/16445 "2021-03-01T10:27:37Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![UlleU](https://avatars.discourse-cdn.com/v4/letter/u/7cd45c/32.png) [@UlleU](https://forum.snapmaker.com/u/UlleU)\
**Post date:** [March 1, 2021, 10:27am UTC](https://forum.snapmaker.com/t/my-first-layers-bends-on-bed/16445/1 "2021-03-01T10:27:37Z")

</div>

I’m quite sure my bed is very even. I don’t use the standard magnetic bed top but have bought the special metal magnetic bed (forgot what it is called), am works quite well.

Recently I have noticed that my prints start to bend at bed level. See pictures.

Any suggestions on what can be wrong?

I have never had this problem before. Can it be because of heat not distributed evenly or something? It really annoys me

 ![WeChat Image_20210301182643](https://us1.discourse-cdn.com/flex022/uploads/snapmaker/original/2X/2/29d29446ef275eae0a1d10bd88cba7523b31482a.jpeg) ![WeChat Image_202103011826431](https://us1.discourse-cdn.com/flex022/uploads/snapmaker/original/2X/2/23eec7161c524a7f3d47d5a3e5a4dfcfe40ce47e.jpeg)