# Multiple nozzle sizes in the same print?

**URL:** <https://forum.snapmaker.com/t/multiple-nozzle-sizes-in-the-same-print/42200>\
**Category:** Snapmaker Orca\
**Created:** [June 9, 2026, 4:47pm UTC](https://forum.snapmaker.com/t/multiple-nozzle-sizes-in-the-same-print/42200 "2026-06-09T16:47:58Z")\
**Posts on this page:** 1\
**Showing post:** 9

<div class="post-metadata">

**Author:** ![xchrisd](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/xchrisd/32/1503_2.png) [@xchrisd](https://forum.snapmaker.com/u/xchrisd)\
**Post date:** [August 25, 2026, 6:47pm UTC](https://forum.snapmaker.com/t/multiple-nozzle-sizes-in-the-same-print/42200/9 "2026-08-25T18:47:38Z")

</div>

Yes it has been done and I think it’s a great addition of slicing features, have a look here:

> [@FOrcaSlicer - Flexible OrcaSlicer | Finer Controls for Snapmaker U1 With Mixed Nozzle Sizes and Color Patch Mode](https://forum.snapmaker.com/t/forcaslicer-flexible-orcaslicer-finer-controls-for-snapmaker-u1-with-mixed-nozzle-sizes-and-color-patch-mode/42560):
>
> TL;DR: FOrcaSlicer (FOS) is a fork of Snapmaker OrcaSlicer for the Snapmaker U1. The U1 has four independent print heads, and FOS makes each one capable of carrying a different nozzle diameter and doing a different job - a fine nozzle on the visible surface, a coarse one on everything behind it, and painted color applied as a thin shell instead of a solid block of filament. Snapmaker Orca is a great slicer to build on; FOS just leans into the U1’s four-head hardware in a way stock doesn’t yet. E…

---

_[View the full topic](https://forum.snapmaker.com/t/multiple-nozzle-sizes-in-the-same-print/42200)._