# Mosaic Palette 3 Pro on Snapmaker Artisan?

**URL:** <https://forum.snapmaker.com/t/mosaic-palette-3-pro-on-snapmaker-artisan/34031>\
**Category:** Artisan (3-in-1)\
**Created:** [December 11, 2023, 11:59pm UTC](https://forum.snapmaker.com/t/mosaic-palette-3-pro-on-snapmaker-artisan/34031 "2023-12-11T23:59:13Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![xchrisd](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/xchrisd/32/1503_2.png) [@xchrisd](https://forum.snapmaker.com/u/xchrisd)\
**Post date:** [December 12, 2023, 7:39pm UTC](https://forum.snapmaker.com/t/mosaic-palette-3-pro-on-snapmaker-artisan/34031/2 "2023-12-12T19:39:48Z")

</div>

Does the Tool change command M600 work when inserted into gcode?

Here some reading:

> [@Guide to connect Snapmaker 2.0 A350 to Palette 3 Pro/Canvas](https://forum.snapmaker.com/t/guide-to-connect-snapmaker-2-0-a350-to-palette-3-pro-canvas/22822/5):
>
> Here are some links that you might be interested in: Just go through the support pages and you should be able to find all of the information that you need.

---

_[View the full topic](https://forum.snapmaker.com/t/mosaic-palette-3-pro-on-snapmaker-artisan/34031)._
