# Modifying Print Parameters **URL:** \ **Category:** Snapmaker Luban\ **Created:** [April 12, 2021, 9:14pm UTC](https://forum.snapmaker.com/t/modifying-print-parameters/17819 "2021-04-12T21:14:48Z")\ **Posts on this page:** 6\ **Page:** 1
**Author:** ![ESMZ](https://avatars.discourse-cdn.com/v4/letter/e/d2c977/32.png) [@ESMZ](https://forum.snapmaker.com/u/ESMZ)\ **Post date:** [April 12, 2021, 9:14pm UTC](https://forum.snapmaker.com/t/modifying-print-parameters/17819/1 "2021-04-12T21:14:48Z")
All hints, answers and the manual indicate that one must select the “plus” sign to modify parameters– however, I am unable to locate any plus anywhere near the printing settings: ![Screen Shot 2021-04-12 at 4.22.08 PM](https://us1.discourse-cdn.com/flex022/uploads/snapmaker/original/2X/f/f261a3408c92c99593eb52d3a40e09aa5f186af9.png) Is there some “safety” feature that needs to be changed in order to reveal mod controls? ---
**Author:** ![RLEE](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/rlee/32/10462_2.png) [@RLEE](https://forum.snapmaker.com/u/RLEE)\ **Post date:** [April 12, 2021, 10:59pm UTC](https://forum.snapmaker.com/t/modifying-print-parameters/17819/2 "2021-04-12T22:59:14Z")
Hopefully this will work for you. Open Luban Select 3DP. The cube icon below the XYZ coordinate system. Upper left-hand corner ![image](https://us1.discourse-cdn.com/flex022/uploads/snapmaker/original/2X/9/9585d273ad7c99b48eebb13b73ef486d9a367115.png) In the Print Settings pull-down [^] , select the gear Icon. ![image](https://us1.discourse-cdn.com/flex022/uploads/snapmaker/original/2X/d/d4943d76fd5f0309f7d3e981b558eab1add7572c.png) This will open up the Print Settings menu. Highlight one of the existing Profiles (for example High Quality) and click Copy. ![image](https://us1.discourse-cdn.com/flex022/uploads/snapmaker/original/2X/1/14684a022e6c9cd3b0084aa2451c3230c3722557.png) Type your new name in the “Name” Field. Make any changes to Quality, Shell, Infill, etc. … you desire. Click Save. ![image](https://us1.discourse-cdn.com/flex022/uploads/snapmaker/original/2X/6/66b9322a0ae6d0b74a72259fddd5bfc6f6ac990e.png) You will now have a new Profile. ![image](https://us1.discourse-cdn.com/flex022/uploads/snapmaker/original/2X/e/e16b54f5ff734941e0e5b37be8d257e4ff46efb2.png) Once you close the Print Setting window you can select your new Profile. ![image](https://us1.discourse-cdn.com/flex022/uploads/snapmaker/original/2X/c/c0775f6246623747ff3a92d343b8e2eecfd8f792.png) ---
**Author:** ![sdj544](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/sdj544/32/11365_2.png) [@sdj544](https://forum.snapmaker.com/u/sdj544)\ **Post date:** [April 12, 2021, 11:06pm UTC](https://forum.snapmaker.com/t/modifying-print-parameters/17819/3 "2021-04-12T23:06:37Z")
Yeah, unfortunately they updated Luban and removed the ‘+’ sign a couple releases ago. But they haven’t updated any of the support material. @RLEE has the correct instructions. -S ---
**Author:** ![Edwin](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/edwin/32/13481_2.png) [@Edwin](https://forum.snapmaker.com/u/Edwin)\ **Post date:** [April 13, 2021, 6:38am UTC](https://forum.snapmaker.com/t/modifying-print-parameters/17819/4 "2021-04-13T06:38:46Z")
It seems that the Product Manager has made this procedure more complicated. Sorry for the inconvenience. Edwin ---
**Author:** ![ESMZ](https://avatars.discourse-cdn.com/v4/letter/e/d2c977/32.png) [@ESMZ](https://forum.snapmaker.com/u/ESMZ)\ **Post date:** [April 15, 2021, 4:50pm UTC](https://forum.snapmaker.com/t/modifying-print-parameters/17819/5 "2021-04-15T16:50:18Z")
Thank you all for the assistance, I am able to copy, paste and modify new profiles now. Still have not figured out how to toggle the auto support feature. The support height I am looking for is no more than 2 or 3 mm in the current case- perhaps that is too small a gap to trigger auto support? ---
**Author:** ![Edwin](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/edwin/32/13481_2.png) [@Edwin](https://forum.snapmaker.com/u/Edwin)\ **Post date:** [April 16, 2021, 8:37am UTC](https://forum.snapmaker.com/t/modifying-print-parameters/17819/6 "2021-04-16T08:37:24Z")
You can add the support manually in Snapmaker Luban 3.14.0. ![image](https://us1.discourse-cdn.com/flex022/uploads/snapmaker/original/2X/b/bd99a4cc7388394f41bd51f27d7fd7507efaecca.png) - Select the model. - Click “Support” - Click ‘Add Support’ - Click “Done” when you finish the process. Cheers Edwin