# Model falls over

**URL:** <https://forum.snapmaker.com/t/model-falls-over/24519>\
**Category:** Snapmaker2.0 Troubleshooting guides\
**Created:** [February 23, 2022, 3:41pm UTC](https://forum.snapmaker.com/t/model-falls-over/24519 "2022-02-23T15:41:12Z")\
**Posts on this page:** 1\
**Showing post:** 13

<div class="post-metadata">

**Author:** ![brent113](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/brent113/32/11114_2.png) [@brent113](https://forum.snapmaker.com/u/brent113)\
**Post date:** [March 1, 2022, 4:38pm UTC](https://forum.snapmaker.com/t/model-falls-over/24519/13 "2022-03-01T16:38:58Z")

</div>

> [@ChewySchu](#):
>
> Has anyone used this site with any success

Yes many people have. I’m not going to link everybody’s report, but here’s mine at least: [Snapmaker 2.0 Initial Calibration Settings / Experiences](https://forum.snapmaker.com/t/snapmaker-2-0-initial-calibration-settings-experiences/9928)

![image](https://us1.discourse-cdn.com/flex022/uploads/snapmaker/original/3X/8/a/8a5959ddc6ec10d7c213f221b887db207f342320.png)

---

_[View the full topic](https://forum.snapmaker.com/t/model-falls-over/24519)._