# Mid print nozzle temp no being obeyed

**URL:** <https://forum.snapmaker.com/t/mid-print-nozzle-temp-no-being-obeyed/12495>\
**Category:** Snapmaker 2.0 (3-in-1)\
**Created:** [December 10, 2020, 10:17am UTC](https://forum.snapmaker.com/t/mid-print-nozzle-temp-no-being-obeyed/12495 "2020-12-10T10:17:33Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![evilscoop](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/evilscoop/32/8670_2.png) [@evilscoop](https://forum.snapmaker.com/u/evilscoop)\
**Post date:** [December 10, 2020, 10:17am UTC](https://forum.snapmaker.com/t/mid-print-nozzle-temp-no-being-obeyed/12495/1 "2020-12-10T10:17:33Z")

</div>

The sm2 seems to be ignoring the M104/M109 temp setting codes, when sent through octoprint.  
I would attach the gcode but being a new user i cannot

Expected the nozzle temp to change each level

Actual, it hits the initial 205 and wont move from that setting.

I found this was a bug that was meant to be fixed in latest firmware…its not fixed  
Also running though octoprint and removing the touchscreen made no differance.

Because of this If your using prusaslicer, the first layer temp is used for the whole model, regardless of the other layers setting for the nozzle

Please [@staff](https://forum.snapmaker.com/groups/staff) can this be sorted asap