# Manual Focus for laser

**URL:** <https://forum.snapmaker.com/t/manual-focus-for-laser/13044>\
**Category:** Snapmaker 2.0 (3-in-1)\
**Created:** [December 21, 2020, 12:16am UTC](https://forum.snapmaker.com/t/manual-focus-for-laser/13044 "2020-12-21T00:16:19Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![spec24](https://avatars.discourse-cdn.com/v4/letter/s/ac8455/32.png) [@spec24](https://forum.snapmaker.com/u/spec24)\
**Post date:** [December 21, 2020, 12:16am UTC](https://forum.snapmaker.com/t/manual-focus-for-laser/13044/1 "2020-12-21T00:16:19Z")

</div>

First time setting up and using the laser. My camera will not autofocus no matter what I do, I have to do manual focus. It asks me to pick which engraved line has the best engraving result. Problem is I have no idea which line has the best engraving result. They all look pretty good. Some are thinner, some are fatter. Which is the best? The first time I did this I picked the one between the thinnest and the thickest. Then I proceeded to the sample project. Problem is the laser did not fully cut through the wood with the sample project. Anyone have any tips? Thanks.

---

<div class="post-metadata">

**Author:** ![brent113](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/brent113/32/11114_2.png) [@brent113](https://forum.snapmaker.com/u/brent113)\
**Post date:** [December 21, 2020, 12:25am UTC](https://forum.snapmaker.com/t/manual-focus-for-laser/13044/2 "2020-12-21T00:25:04Z")

</div>

Maybe this will help:

> [@Comments on Quick Start Guide and Laser User Manual](https://forum.snapmaker.com/t/comments-on-quick-start-guide-and-laser-user-manual/10194/11):
>
> The thinnest line indicates the correct focus. It can be confirmed by looking left and right about 4 lines and checking those lines are equal sized. I chose the one marked in green. And the yellow marked lined 4 to each side are the same size. [image] I almost chose the one immediately to the right of the one marked in green, but comparing the size of the lines 4 away from that there’s a big difference. In that case the line 4 to the right is noticeably wider than the one 4 to the left. [ima…

---

<div class="post-metadata">

**Author:** ![spec24](https://avatars.discourse-cdn.com/v4/letter/s/ac8455/32.png) [@spec24](https://forum.snapmaker.com/u/spec24)\
**Post date:** [December 21, 2020, 12:33am UTC](https://forum.snapmaker.com/t/manual-focus-for-laser/13044/3 "2020-12-21T00:33:22Z")

</div>

Thanks Brent. I’ll give it a try.

---

<div class="post-metadata">

**Author:** ![msiek](https://avatars.discourse-cdn.com/v4/letter/m/e8c25b/32.png) [@msiek](https://forum.snapmaker.com/u/msiek)\
**Post date:** [December 21, 2020, 3:15am UTC](https://forum.snapmaker.com/t/manual-focus-for-laser/13044/4 "2020-12-21T03:15:35Z")

</div>

They really should just reword the choice to “pick the thinnest line” then. Like anyone brand new to this has any idea how to qualify what is “best”
