MakerStride Workshop - Connecting Snapmaker U1 Prints to Spools, Costs and Finished Work

I have read and understood all rules of the Innovation Fund Phase 2

on

I consent to my project information (username, project cover, summary, etc.) being publicly displayed for review and showcase

on

Username (for public display)

Shooter66

Project name

Connecting Snapmaker U1 Prints to Spools, Costs and Finished Makes

Project URL

Project cover

Project Category

Software

Project Summary

MakerStride connects Snapmaker U1 printing with the practical work of managing a maker’s workshop: physical filament inventory, material usage, print costs and finished items. Free Hobby Workshop accounts provide an entry point, with paid plans and features offering additional capabilities.

A completed printer job tells only part of the story. Makers also need to know which physical rolls were used, whether a spool was replaced, how several printed plates combine into one finished item, and what that result cost. MakerStride brings these details together in a guided workflow.

A working connection to Snapmaker U1

The MakerStride Helper runs on a Windows computer on the U1’s local network. It reads printer status and completed-print history through Moonraker and sends those readings to the user’s paired MakerStride account. It does not start, stop or control prints.

Within MakerStride, users can:

  • See U1 connection status and distinguish fresh readings from stale information.
  • Select completed U1 jobs from printer history.
  • Map the U1’s four spool-holder positions to physical rolls in their filament inventory.
  • Record original spools and ordered replacements, confirming usage against each roll.
  • Log an individual print or combine several plates into one finished “Make.”
  • Review material usage, time, costs, notes, photos and finished quantity before saving.
  • Match completed printer jobs to existing planned print runs.

Each plate retains its own records while the Make brings together the overall result. Within the saved printer/account identity, logged history entries reopen their existing records without deducting filament again.

Designed around real workshop decisions

MakerStride does not assume that a filament colour identifies a physical roll or that today’s loaded spool was used for an earlier print. Users confirm historical spool assignments, replacements and consumption. Printer and slicer estimates are distinguished from independently measured usage.

Inventory changes occur only after the user reviews and confirms the result—not simply because the Helper receives a completed job.

Implemented and validated

Tested with my own U1 on MakerStride’s live site, covering status, history and multi-plate logging. Test filament amounts confirmed correct balance updates without duplicate deductions.

How an award would help

Funding would prioritise independent security testing, hosting and performance assessment, and reliability and backup-recovery testing. A pilot with additional U1 owners would strengthen validation and improve guidance for installation and troubleshooting.

Further priorities include regional English, independent preferences for units, dates and currency, followed by a Simplified Chinese interface and documentation pilot with native-speaker review.

MakerStride’s contribution is a practical bridge from completed U1 prints to traceable spools, understandable costs and useful records of finished work.

Open Source Status

Closed Source

Please specify the open source license used by this project

N/A

Cash Fund or U1 Hardware Sponsorship

Cash Fund

Originality

Improvement / optimization based on an existing project

If based on an existing project — your independent contribution

MakerStride is my independently developed platform, encompassing MakerStride Workshop and MakerStride Marketplace. This submission presents MakerStride as a whole, with its working Snapmaker U1 integration demonstrating its connection to the U1 ecosystem. The platform predates this competition; recent development adds the Windows Helper, U1 status and history integration, physical spool mapping, replacements and multi-plate Make logging.

Is it a paid project?

Yes

Here’s a closer look at MakerStride’s working Snapmaker U1 integration, using the included dragon as an example.

1. Live printer status and physical spool mapping

MakerStride’s Windows Helper reads status and print history from my U1. The screen below shows a live print alongside the spool-mapping interface, where users link each holder to a physical roll in their inventory. The Helper reads information; it does not control the printer.

2. From printer history to a workshop record

I selected my original completed dragon print from the U1’s history and linked it to a planned MakerStride print run. Before saving, I reviewed the four filament rolls, material usage, print time and costs.

For this walkthrough, the inventory and costs are demonstration data. The 43.60 g material total comes from slicer estimates, rather than independently measured consumption.

3. The finished result

The saved record brings together the print details, filament deductions, cost breakdown and a photo of the actual dragon I printed. Finishing the Make records one completed item for personal use.

The original U1 history entry now links back to this saved record. Opening it again does not create another print or deduct filament a second time.

This is the practical connection I’m building: from a completed U1 print to the physical rolls used, an understandable cost and a useful record of the finished result.

MakerStride also connects to the Open Filament Database, helping users find filament details when building their inventory. The catalogue identifies the filament product, while MakerStride tracks each physical roll and its use in completed prints.

MakerStride Workshop includes a free Hobby account. I’d welcome questions and feedback from other U1 owners, particularly about how you currently track filament and completed prints.

Hi, if the team wants to test the workflow tool, how can they get a free Hobby account? And how long is it valid for?

Hi @Zoe_M, the URL provided goes to a landing page with a link through to sign-up or there is a “sign-up for an account” at the login page found here MakerStride Workshop - Login .

New users are granted a Hobby Account which is valid and usable without any imposed end date.

I can also provide extended “free trial” periods (giving access to all capability across the site) so let me know what you will want/need.

Cheers Shooter.

For anyone interested in the wider platform, I’ve put together a full feature overview of MakerStride Workshop and MarketPlace Store. It shows how the U1 integration fits into filament inventory, print planning, costs and finished-item records.

Workshop includes a free Hobby account. I’d welcome feedback from U1 owners on which parts would be most useful in their own workshop.

Cheers
Shooter.