# Maintenance reminder U1

**URL:** <https://forum.snapmaker.com/t/maintenance-reminder-u1/43187>\
**Category:** Feature Requests\
**Created:** [August 31, 2026, 9:46pm UTC](https://forum.snapmaker.com/t/maintenance-reminder-u1/43187 "2026-08-31T21:46:31Z")\
**Posts on this page:** 8\
**Page:** 1

<div class="post-metadata">

**Author:** ![xmg67](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/xmg67/32/33702_2.png) [@xmg67](https://forum.snapmaker.com/u/xmg67)\
**Post date:** [August 31, 2026, 9:46pm UTC](https://forum.snapmaker.com/t/maintenance-reminder-u1/43187/1 "2026-08-31T21:46:31Z")

</div>

Thta would be good to have an automatic Maintenance reminder after a certain number of printing . Thta would ease the whole tasks that need to be done.

---

<div class="post-metadata">

**Author:** ![Zoe\_M](https://avatars.discourse-cdn.com/v4/letter/z/8491ac/32.png) [@Zoe\_M](https://forum.snapmaker.com/u/Zoe_M)\
**Post date:** [September 1, 2026, 8:57am UTC](https://forum.snapmaker.com/t/maintenance-reminder-u1/43187/2 "2026-09-01T08:57:16Z")

</div>

Hi, automatic maintenance reminders are highly desirable, though the trigger “after a certain number of printing” would need further review. A batch of ten print jobs can include short 5‑minute parts as well as 20‑hour large prints, leading to huge variance in material usage and component wear.

I think total print time and tool‑change count might be more suitable metrics.

---

<div class="post-metadata">

**Author:** ![Printoid](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/printoid/32/33529_2.png) [@Printoid](https://forum.snapmaker.com/u/Printoid)\
**Post date:** [November 8, 2026, 11:22am UTC](https://forum.snapmaker.com/t/maintenance-reminder-u1/43187/3 "2026-11-08T11:22:22Z")

</div>

I agree an was a big surprised we don’t have thids feature yet!

The wiki says some maintenance should be done monthly, but what if the printer is never or rarely used this month, but next month it’s used everyday?

Of course the answer is to schedule maintenance per use hours!

The printer already tracks print hours as well as time per print head!

Can engineering figure out how to add this simple feature to the next firmware release?

It will help make the U1 more user friendly and help to maintain print quality!

---

<div class="post-metadata">

**Author:** ![Zoe\_M](https://avatars.discourse-cdn.com/v4/letter/z/8491ac/32.png) [@Zoe\_M](https://forum.snapmaker.com/u/Zoe_M)\
**Post date:** [November 9, 2026, 3:05am UTC](https://forum.snapmaker.com/t/maintenance-reminder-u1/43187/4 "2026-11-09T03:05:16Z")

</div>

Hi, Thanks for the feedback.  
The feature scope for V2.2.0 has already been finalized and are now in development, so this may not make it into that release.  
I’ve flagged this request to the product team and will follow up on when it can be scheduled.

Best regards.

---

<div class="post-metadata">

**Author:** ![Printoid](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/printoid/32/33529_2.png) [@Printoid](https://forum.snapmaker.com/u/Printoid)\
**Post date:** [November 9, 2026, 8:24am UTC](https://forum.snapmaker.com/t/maintenance-reminder-u1/43187/5 "2026-11-09T08:24:10Z")

</div>

Thank you. As long as it gets incorporated and not forgotten, it certainly will be useful to users.

---

<div class="post-metadata">

**Author:** ![CrazyIvan](https://avatars.discourse-cdn.com/v4/letter/c/7bcc69/32.png) [@CrazyIvan](https://forum.snapmaker.com/u/CrazyIvan)\
**Post date:** [November 9, 2026, 2:08pm UTC](https://forum.snapmaker.com/t/maintenance-reminder-u1/43187/6 "2026-11-09T14:08:32Z")

</div>

This sort of thing has been under discussion since at least March:

[https://forum.snapmaker.com/t/wartung-des-u1/41530](https://forum.snapmaker.com/t/wartung-des-u1/41530)

[https://forum.snapmaker.com/t/how-often-should-i-be-doing-maintenance/43396](https://forum.snapmaker.com/t/how-often-should-i-be-doing-maintenance/43396)

---

<div class="post-metadata">

**Author:** ![xmg67](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/xmg67/32/33702_2.png) [@xmg67](https://forum.snapmaker.com/u/xmg67)\
**Post date:** [November 9, 2026, 2:26pm UTC](https://forum.snapmaker.com/t/maintenance-reminder-u1/43187/7 "2026-11-09T14:26:16Z")

</div>

Hi Zoe,  
Could we have good guidelines in the meantime. A number of tool change, a number of hours in a wiki ? We know that correcting potential bugs in the firmware or snorca is a MUST but maintenance is also an important matter if we want to extend our U1 lenght of service.

---

<div class="post-metadata">

**Author:** ![anon79306136](https://avatars.discourse-cdn.com/v4/letter/a/b9e5f3/32.png) [@anon79306136](https://forum.snapmaker.com/u/anon79306136)\
**Post date:** [November 9, 2026, 2:35pm UTC](https://forum.snapmaker.com/t/maintenance-reminder-u1/43187/8 "2026-11-09T14:35:02Z")

</div>

If you use your machine on average 8 hrs per day then go by the guidelines in the official video (that’s what I’m currently following) If less I would still stick to this as a minimum but go more if you are a print farm/24/7 printer

[![](https://us1.discourse-cdn.com/flex022/uploads/snapmaker/original/3X/4/7/479faa6248c395283a0c8aa2bbd3946b3d12bab1.jpeg "U1 Video Guide: Key Components Maintenance") ](https://www.youtube.com/watch?v=EGfoaHfxalA)
