# Luben won't save my printer settings

**URL:** <https://forum.snapmaker.com/t/luben-wont-save-my-printer-settings/9469>\
**Category:** Snapmaker Luban\
**Created:** [September 19, 2020, 12:54am UTC](https://forum.snapmaker.com/t/luben-wont-save-my-printer-settings/9469 "2020-09-19T00:54:58Z")\
**Posts on this page:** 9\
**Page:** 1

<div class="post-metadata">

**Author:** ![BillR94](https://avatars.discourse-cdn.com/v4/letter/b/8c91f0/32.png) [@BillR94](https://forum.snapmaker.com/u/BillR94)\
**Post date:** [September 19, 2020, 12:54am UTC](https://forum.snapmaker.com/t/luben-wont-save-my-printer-settings/9469/1 "2020-09-19T00:54:58Z")

</div>

I can create materials ie: PETG. semi-flex, etc. but when I create the printer setting for that given material, Luben does not save the settings. When I open Luben, thise settings I created are gone.

Are there any tutorials on how to configure Luban?

---

<div class="post-metadata">

**Author:** ![Edwin](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/edwin/32/13481_2.png) [@Edwin](https://forum.snapmaker.com/u/Edwin)\
**Post date:** [September 19, 2020, 10:12am UTC](https://forum.snapmaker.com/t/luben-wont-save-my-printer-settings/9469/2 "2020-09-19T10:12:19Z")

</div>

You can add the specified material mode in Snapmaker Luban. And here is a video for your reference:

> **[Adding material settings.mp4 (video)](https://drive.google.com/file/d/1gdwjwMNPmE3MB52AmLhzUUCtkLrX89gz/view?usp=sharing)**
>
> Google Drive file.

---

<div class="post-metadata">

**Author:** ![BillR94](https://avatars.discourse-cdn.com/v4/letter/b/8c91f0/32.png) [@BillR94](https://forum.snapmaker.com/u/BillR94)\
**Post date:** [September 19, 2020, 2:24pm UTC](https://forum.snapmaker.com/t/luben-wont-save-my-printer-settings/9469/3 "2020-09-19T14:24:34Z")

</div>

Thanks Edwin. Unfortunately, that video was not much help. It shows how to add material but does not go into the printer settings. I can customize the printer settings for a given material, but when I close and re-open luben, all the custom printer settings are gone.

---

<div class="post-metadata">

**Author:** ![Hbargs](https://avatars.discourse-cdn.com/v4/letter/h/f1d935/32.png) [@Hbargs](https://forum.snapmaker.com/u/Hbargs)\
**Post date:** [September 30, 2020, 3:49pm UTC](https://forum.snapmaker.com/t/luben-wont-save-my-printer-settings/9469/4 "2020-09-30T15:49:45Z")

</div>

I’m having the same issue with any added “Printing Settings”. I can add a new setting and customize the printing parameters for a given job but even if I save the settings, they are not there the next time I open Luban. I even tried saving the print settings and re-loading them the next time I open Luban but the saved setting file doesn’t seem to be loading because the saved settings are not shown as an option in the print setting drop down list. I also tried saving the print environment but that didn’t work either. This issue is leading to a poor customer experience due to having to reload customer print settings if I use any filament other than PLA or ABS. HELP!

Any updates from Snapmaker Luban technical support would be helpful.

---

<div class="post-metadata">

**Author:** ![BillR94](https://avatars.discourse-cdn.com/v4/letter/b/8c91f0/32.png) [@BillR94](https://forum.snapmaker.com/u/BillR94)\
**Post date:** [September 30, 2020, 5:28pm UTC](https://forum.snapmaker.com/t/luben-wont-save-my-printer-settings/9469/5 "2020-09-30T17:28:58Z")

</div>

Thanks Hbargs. I can’t seem to find any tutorial/instructions on how to create and save material profiles. Maybe I’m wrong. Hopefully we can get an answer.

---

<div class="post-metadata">

**Author:** ![dougie42](https://avatars.discourse-cdn.com/v4/letter/d/7c8e57/32.png) [@dougie42](https://forum.snapmaker.com/u/dougie42)\
**Post date:** [February 19, 2021, 3:54pm UTC](https://forum.snapmaker.com/t/luben-wont-save-my-printer-settings/9469/6 "2021-02-19T15:54:32Z")

</div>

Hi, I have tried to set up PETG settings, but I cannot get the Luben software to let me changes in the section: Quality down to the support. A red circle with a line comes up when going to these settings. However, the settings for flow and temperature will change and seem to be recorded. I had to copy the PLA setting and then rename it as PETG, which did the first part, but I don’t want to go forward without making the other changes. Can you help?

---

<div class="post-metadata">

**Author:** ![BillR94](https://avatars.discourse-cdn.com/v4/letter/b/8c91f0/32.png) [@BillR94](https://forum.snapmaker.com/u/BillR94)\
**Post date:** [February 19, 2021, 10:58pm UTC](https://forum.snapmaker.com/t/luben-wont-save-my-printer-settings/9469/7 "2021-02-19T22:58:21Z")

</div>

I have not figured out how to add filament types and save them to Luban. I have asked and gotten no response. I use Simplify3D, there fore I have not pursued the settings in Luban.Sorry I couldn’t be more help.

---

<div class="post-metadata">

**Author:** ![dougie42](https://avatars.discourse-cdn.com/v4/letter/d/7c8e57/32.png) [@dougie42](https://forum.snapmaker.com/u/dougie42)\
**Post date:** [February 28, 2021, 2:29pm UTC](https://forum.snapmaker.com/t/luben-wont-save-my-printer-settings/9469/8 "2021-02-28T14:29:15Z")

</div>

I think I may have saved it. When you select a setting: fast, normal, high and then options; first save a copy and you can then edit that copy.

---

<div class="post-metadata">

**Author:** ![lei](https://avatars.discourse-cdn.com/v4/letter/l/7feea3/32.png) [@lei](https://forum.snapmaker.com/u/lei)\
**Post date:** [March 5, 2021, 12:30pm UTC](https://forum.snapmaker.com/t/luben-wont-save-my-printer-settings/9469/9 "2021-03-05T12:30:16Z")

</div>

I too would like to request this issue be fixed! In general Luban does most things I need it to except save the printer settings. It also does not save manual text size changes unless done by setting the font size. This is really inconvenient and I find myself using Lightburn, but Lightburn does not connect via wi-fi nor does it support the camera. What to do…

1. Fix Save in Luban
2. Add wi-fi for Lightburn
3. Add Camera support for Lightburn
4. Open .lbrn files in Luban

Any or all of these suggestions would really help me out!  
Thanks
