# Luban rotating object 90 degrees in workspace **URL:** \ **Category:** Snapmaker Luban\ **Created:** [July 22, 2020, 5:19pm UTC](https://forum.snapmaker.com/t/luban-rotating-object-90-degrees-in-workspace/7839 "2020-07-22T17:19:11Z")\ **Posts on this page:** 6\ **Page:** 1
**Author:** ![AndyFox](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/andyfox/32/3156_2.png) [@AndyFox](https://forum.snapmaker.com/u/AndyFox)\ **Post date:** [July 22, 2020, 5:19pm UTC](https://forum.snapmaker.com/t/luban-rotating-object-90-degrees-in-workspace/7839/1 "2020-07-22T17:19:11Z")
I just upgraded my SnapMaker Luban from 3.5.0 to 3.7.0 (both Windows x64 versions) and it’s now doing a very strange thing: 1. I load an STL file into the G-Code Generator. Everything looks good. 2. I “Generate G-code”. Everything still looks good. Skirt is around the base as it should be. 3. I “Load G-code to Workspace”. 4. Here’s the weird part: In the workspace my object (and skirt) is rotated 90 degrees along the X-Axis. The little icon next to the filename is also rotated and if I send the file to my printer it shows as rotated on the touch screen as well and it will print rotated. If I go back to the G-Code page everything still looks fine there. This is totally new behavior and was not happening with version 3.5.0 of Luban. I even un-installed, 3.7.0, re-booted, and re-installed 3.7.0 and the problem persists. Running Windows 7 64-bit. ---
**Author:** ![AndyFox](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/andyfox/32/3156_2.png) [@AndyFox](https://forum.snapmaker.com/u/AndyFox)\ **Post date:** [July 23, 2020, 3:38pm UTC](https://forum.snapmaker.com/t/luban-rotating-object-90-degrees-in-workspace/7839/2 "2020-07-23T15:38:32Z")
Here are some screen shots that exemplify the issue I am having: STL file, G-Code, Workbench, and screenshot of the touchscreen. The red circles in the workspace screenshot show how the object has been rotated 90 degrees on the X-Axis. ![Luban1](https://us1.discourse-cdn.com/flex022/uploads/snapmaker/original/2X/b/bb13031b4058e5dbaf4fe73024405afa83e6cebc.jpeg) ![Luban2](https://us1.discourse-cdn.com/flex022/uploads/snapmaker/original/2X/f/f9402411c0910cfa4a9a0b96266486eee21b2cac.jpeg) ![Luban3](https://us1.discourse-cdn.com/flex022/uploads/snapmaker/original/2X/0/03b64b9b46b8639ccfc68b83d71ab2f152f74bf1.jpeg) ![Luban4](https://us1.discourse-cdn.com/flex022/uploads/snapmaker/original/2X/2/2e9456ef030c9a5384c7eae7325955a55bad4d69.jpeg) ---
**Author:** ![C.Harris](https://avatars.discourse-cdn.com/v4/letter/c/5f9b8f/32.png) [@C.Harris](https://forum.snapmaker.com/u/C.Harris)\ **Post date:** [July 24, 2020, 8:47am UTC](https://forum.snapmaker.com/t/luban-rotating-object-90-degrees-in-workspace/7839/3 "2020-07-24T08:47:53Z")
Have you tried printing the file? If so did it print as expected regardless of the preview? If yes then I would simply email support to notify them of the bug! ---
**Author:** ![AndyFox](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/andyfox/32/3156_2.png) [@AndyFox](https://forum.snapmaker.com/u/AndyFox)\ **Post date:** [July 24, 2020, 1:31pm UTC](https://forum.snapmaker.com/t/luban-rotating-object-90-degrees-in-workspace/7839/4 "2020-07-24T13:31:03Z")
I found something that would be safe to print on it’s side and it did print normally, so the issue is with the Luban workspace and thumbnail images it generates. ---
**Author:** ![albutch](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/albutch/32/16397_2.png) [@albutch](https://forum.snapmaker.com/u/albutch)\ **Post date:** [July 25, 2020, 11:46pm UTC](https://forum.snapmaker.com/t/luban-rotating-object-90-degrees-in-workspace/7839/5 "2020-07-25T23:46:37Z")
It’s just showing the top down view in the workspace isn’t it? You can change the view with a left mouse click and hold then drag. ---
**Author:** ![AndyFox](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/andyfox/32/3156_2.png) [@AndyFox](https://forum.snapmaker.com/u/AndyFox)\ **Post date:** [July 26, 2020, 5:27am UTC](https://forum.snapmaker.com/t/luban-rotating-object-90-degrees-in-workspace/7839/6 "2020-07-26T05:27:11Z")
Correct, but the point is Luban 3.5 showed it in correct orientation, both in workspace and the thumbnail. The 90 degree rotation with 3.7 is disorientating and misleading.