# Luban Issues with G-Code?

**URL:** <https://forum.snapmaker.com/t/luban-issues-with-g-code/33725>\
**Category:** Artisan (3-in-1)\
**Created:** [November 21, 2023, 3:24pm UTC](https://forum.snapmaker.com/t/luban-issues-with-g-code/33725 "2023-11-21T15:24:06Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![cptnmorg45](https://avatars.discourse-cdn.com/v4/letter/c/ee59a6/32.png) [@cptnmorg45](https://forum.snapmaker.com/u/cptnmorg45)\
**Post date:** [November 21, 2023, 3:24pm UTC](https://forum.snapmaker.com/t/luban-issues-with-g-code/33725/1 "2023-11-21T15:24:06Z")

</div>

Howdy

Anyone else having issues when generating the g-code in luban? I’m on the latest version and it was working fine for the first couple days then all of a sudden when generating the g-code it stops at 10%. I’m thinking i need to downgrade to the previous version but was curious if it was happening to anyone else.

---

<div class="post-metadata">

**Author:** ![xchrisd](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/xchrisd/32/1503_2.png) [@xchrisd](https://forum.snapmaker.com/u/xchrisd)\
**Post date:** [November 22, 2023, 1:03pm UTC](https://forum.snapmaker.com/t/luban-issues-with-g-code/33725/2 "2023-11-22T13:03:48Z")

</div>

May share a for you not working model so somebody could try?