# Luban generate supports for Breakaway filament?

**URL:** <https://forum.snapmaker.com/t/luban-generate-supports-for-breakaway-filament/32220>\
**Category:** Snapmaker Luban\
**Created:** [July 20, 2023, 3:02pm UTC](https://forum.snapmaker.com/t/luban-generate-supports-for-breakaway-filament/32220 "2023-07-20T15:02:46Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![sandrobilbeisi](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/sandrobilbeisi/32/8288_2.png) [@sandrobilbeisi](https://forum.snapmaker.com/u/sandrobilbeisi)\
**Post date:** [July 20, 2023, 3:02pm UTC](https://forum.snapmaker.com/t/luban-generate-supports-for-breakaway-filament/32220/1 "2023-07-20T15:02:46Z")

</div>

Hello

So far , I have used only Cura and PrusaSlicer to do support in breakaway material

I would like to learn to do that in Luban , but I have not found any documentation or tutorial !!!

---

<div class="post-metadata">

**Author:** ![sandrobilbeisi](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/sandrobilbeisi/32/8288_2.png) [@sandrobilbeisi](https://forum.snapmaker.com/u/sandrobilbeisi)\
**Post date:** [July 20, 2023, 4:58pm UTC](https://forum.snapmaker.com/t/luban-generate-supports-for-breakaway-filament/32220/2 "2023-07-20T16:58:01Z")

</div>

Ok, I figured it out !

It’s totally automatic when you have the right nozzle configured for Breakaway support

First you generate the supports

 ![Screenshot 2023-07-20 at 18.56.41](https://us1.discourse-cdn.com/flex022/uploads/snapmaker/original/3X/c/a/ca1938ce144e631ac44ea2bb93838abaea1d9438.png)

Then all you have to do is make sure that the Support Helper has the right extruder selected

 ![Screenshot 2023-07-20 at 18.56.50](https://us1.discourse-cdn.com/flex022/uploads/snapmaker/original/3X/f/2/f23df5c436186a484dae09aabe3f61b79aecd968.png)  
Click Helpers / Support and make sure that it has ‘R’ selected

---

<div class="post-metadata">

**Author:** ![sandrobilbeisi](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/sandrobilbeisi/32/8288_2.png) [@sandrobilbeisi](https://forum.snapmaker.com/u/sandrobilbeisi)\
**Post date:** [July 22, 2023, 10:00am UTC](https://forum.snapmaker.com/t/luban-generate-supports-for-breakaway-filament/32220/3 "2023-07-22T10:00:13Z")

</div>

The SnapMaker wiki has an article on dual material slicing (albeit not specific to breakaway supports:  
[https://wiki.snapmaker.com/Snapmaker\_Luban/dual\_matieral\_slice](https://wiki.snapmaker.com/Snapmaker_Luban/dual_matieral_slice)