# Luban functions suggestions **URL:** \ **Category:** Snapmaker Luban\ **Created:** [December 5, 2020, 12:22pm UTC](https://forum.snapmaker.com/t/luban-functions-suggestions/12297 "2020-12-05T12:22:01Z")\ **Posts on this page:** 1\ **Showing post:** 2
**Author:** ![zauguin](https://avatars.discourse-cdn.com/v4/letter/z/c89c15/32.png) [@zauguin](https://forum.snapmaker.com/u/zauguin)\ **Post date:** [December 5, 2020, 12:54pm UTC](https://forum.snapmaker.com/t/luban-functions-suggestions/12297/2 "2020-12-05T12:54:11Z")
> [@VinlandMaker](#): > > could we get a pass trough function that would enable the user to use the file as is and bypass the luban process, i process my files on gimp and other program and i don’t need to add more processes on top of it. If you already have a program which generates G-Code you can directly load the G-Code file in the “Workspace” tab. Then AFAIR it gets printed as is. If xou only use GIMP and other image programs though you probably end up with a bitmap based image file. Then you will always need another tool to convert it to G-Code the machine understands. > [@VinlandMaker](#): > > also a function to be able to engrave and cut on the same g code would be a worth wile tool. See [A250 laser engrave & cut](https://forum.snapmaker.com/t/a250-laser-engrave-cut/6904) : Basically it’s possible by adding multiple objects to Luban and then setting the Laser settings separately for each object. --- _[View the full topic](https://forum.snapmaker.com/t/luban-functions-suggestions/12297)._