# Luban for laser work is really bad

**URL:** <https://forum.snapmaker.com/t/luban-for-laser-work-is-really-bad/40514>\
**Category:** Snapmaker Luban\
**Created:** [November 25, 2025, 9:10am UTC](https://forum.snapmaker.com/t/luban-for-laser-work-is-really-bad/40514 "2025-11-25T09:10:32Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![volrad.inc](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/volrad.inc/32/30981_2.png) [@volrad.inc](https://forum.snapmaker.com/u/volrad.inc)\
**Post date:** [November 25, 2025, 9:10am UTC](https://forum.snapmaker.com/t/luban-for-laser-work-is-really-bad/40514/1 "2025-11-25T09:10:33Z")

</div>

I am amazed how Snapmaker dropped the ball on their software. That it cant diffirentiate between cut lines, score lines and areas to engrave is quite astonishing. It also hasnt been updated in forever.

Hade I known this I would have picked another machine.

---

<div class="post-metadata">

**Author:** ![Blockmodule](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/blockmodule/32/11177_2.png) [@Blockmodule](https://forum.snapmaker.com/u/Blockmodule)\
**Post date:** [November 25, 2025, 9:36am UTC](https://forum.snapmaker.com/t/luban-for-laser-work-is-really-bad/40514/2 "2025-11-25T09:36:56Z")

</div>

Luban is rotten, so you can be happy with Lightburn.

---

<div class="post-metadata">

**Author:** ![Simon\_Zhi](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/simon_zhi/32/30470_2.png) [@Simon\_Zhi](https://forum.snapmaker.com/u/Simon_Zhi)\
**Post date:** [November 25, 2025, 12:32pm UTC](https://forum.snapmaker.com/t/luban-for-laser-work-is-really-bad/40514/3 "2025-11-25T12:32:39Z")

</div>

[Using Ray/Artisan/2.0 with LightBurn | Snapmaker Wiki](https://wiki.snapmaker.com/en/general/manual/use_ray_with_lightburn_guide)

This might be helpful to you！