# Luban camera capture stopped working in latest version

**URL:** <https://forum.snapmaker.com/t/luban-camera-capture-stopped-working-in-latest-version/6442>\
**Category:** Snapmaker Luban\
**Created:** [May 2, 2020, 4:41pm UTC](https://forum.snapmaker.com/t/luban-camera-capture-stopped-working-in-latest-version/6442 "2020-05-02T16:41:13Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![RoboticNick](https://avatars.discourse-cdn.com/v4/letter/r/4bbf92/32.png) [@RoboticNick](https://forum.snapmaker.com/u/RoboticNick)\
**Post date:** [May 2, 2020, 4:41pm UTC](https://forum.snapmaker.com/t/luban-camera-capture-stopped-working-in-latest-version/6442/1 "2020-05-02T16:41:13Z")

</div>

Updated firmware (Snapmaker2\_V1.7.1.1) and software (snapmaker-luban-3.3.3-win-x64) and now the camera capture for the laser cutter doesn’t work. Just shows a blank screen

---

<div class="post-metadata">

**Author:** ![Isaac11](https://avatars.discourse-cdn.com/v4/letter/i/9de0a6/32.png) [@Isaac11](https://forum.snapmaker.com/u/Isaac11)\
**Post date:** [May 2, 2020, 5:28pm UTC](https://forum.snapmaker.com/t/luban-camera-capture-stopped-working-in-latest-version/6442/2 "2020-05-02T17:28:24Z")

</div>

Did you try to click on calibration button ?

---

<div class="post-metadata">

**Author:** ![Melanchrom](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/melanchrom/32/5202_2.png) [@Melanchrom](https://forum.snapmaker.com/u/Melanchrom)\
**Post date:** [May 2, 2020, 6:23pm UTC](https://forum.snapmaker.com/t/luban-camera-capture-stopped-working-in-latest-version/6442/3 "2020-05-02T18:23:58Z")

</div>

There is a newer version of Luban.

[https://forum.snapmaker.com/t/snapmaker-luban-downloads-and-updates/4949/12](https://forum.snapmaker.com/t/snapmaker-luban-downloads-and-updates/4949/12)