# Luban 4th axis milling is cool! And dumb... And dangerous!

**URL:** <https://forum.snapmaker.com/t/luban-4th-axis-milling-is-cool-and-dumb-and-dangerous/32683>\
**Category:** Snapmaker 2.0 (3-in-1)\
**Created:** [August 27, 2023, 5:22pm UTC](https://forum.snapmaker.com/t/luban-4th-axis-milling-is-cool-and-dumb-and-dangerous/32683 "2023-08-27T17:22:28Z")\
**Posts on this page:** 1\
**Showing post:** 3

<div class="post-metadata">

**Author:** ![Hauke](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/hauke/32/5704_2.png) [@Hauke](https://forum.snapmaker.com/u/Hauke)\
**Post date:** [November 25, 2023, 11:07pm UTC](https://forum.snapmaker.com/t/luban-4th-axis-milling-is-cool-and-dumb-and-dangerous/32683/3 "2023-11-25T23:07:43Z")

</div>

OK I promised pictures - before I do a full writeup of my odyssey to get there (too late today), here at least a few pictures of what I would call a success (not perfect, far from what a resin printer could do with ease, but nice enough!) with an 0.2 mm nozzle and PVA as support interface material:

Print finished:

 ![grafik](https://us1.discourse-cdn.com/flex022/uploads/snapmaker/original/3X/2/f/2fb0e7f017f604a0aff6697865d6f1fcaf3ce559.jpeg)

Meet Rendor Holoam, the Prince of the Silver Dwarfs:

 ![grafik](https://us1.discourse-cdn.com/flex022/uploads/snapmaker/original/3X/1/3/1376ddcaf844c8ee952df9854762bb4e4777b6f9.jpeg)

 ![grafik](https://us1.discourse-cdn.com/flex022/uploads/snapmaker/original/3X/b/c/bc0f9931d9fe50a9da49acebe6ff6ba2054ebc23.jpeg)

The pictures, showing every shadow in harsh light, look worse than the original - it turned out really nice IMHO!

EDIT: Full writeup here: [Tabletop miniature with 0.2 mm nozzle and PVA support (Dual Extruder)](https://forum.snapmaker.com/t/tabletop-miniature-with-0-2-mm-nozzle-and-pva-support-dual-extruder/33809)

---

_[View the full topic](https://forum.snapmaker.com/t/luban-4th-axis-milling-is-cool-and-dumb-and-dangerous/32683)._