# Luban 4.13.1-beta.2.3.2

**URL:** <https://forum.snapmaker.com/t/luban-4-13-1-beta-2-3-2/38035>\
**Category:** Snapmaker 2.0 (3-in-1)\
**Tags:** Snapmaker\_Luban\
**Created:** [October 29, 2024, 7:52pm UTC](https://forum.snapmaker.com/t/luban-4-13-1-beta-2-3-2/38035 "2024-10-29T19:52:00Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![hijackgmh](https://avatars.discourse-cdn.com/v4/letter/h/c2a13f/32.png) [@hijackgmh](https://forum.snapmaker.com/u/hijackgmh)\
**Post date:** [October 29, 2024, 7:52pm UTC](https://forum.snapmaker.com/t/luban-4-13-1-beta-2-3-2/38035/1 "2024-10-29T19:52:00Z")

</div>

I loaded the beta, but it hangs when I select Generate G-Code and Export. I’m trying to use the 1.6 laser.

---

<div class="post-metadata">

**Author:** ![hijackgmh](https://avatars.discourse-cdn.com/v4/letter/h/c2a13f/32.png) [@hijackgmh](https://forum.snapmaker.com/u/hijackgmh)\
**Post date:** [October 30, 2024, 3:49pm UTC](https://forum.snapmaker.com/t/luban-4-13-1-beta-2-3-2/38035/2 "2024-10-30T15:49:53Z")

</div>

I see that 27 folks looked at my note, but nobody made a comment. Should I assume that this release is working OK for all of you?!?

Mike

---

<div class="post-metadata">

**Author:** ![kfricke](https://avatars.discourse-cdn.com/v4/letter/k/ce73a5/32.png) [@kfricke](https://forum.snapmaker.com/u/kfricke)\
**Post date:** [October 30, 2024, 4:34pm UTC](https://forum.snapmaker.com/t/luban-4-13-1-beta-2-3-2/38035/3 "2024-10-30T16:34:58Z")

</div>

I do not use Luban. Did you try the latest stable (non beta) version?

---

<div class="post-metadata">

**Author:** ![hijackgmh](https://avatars.discourse-cdn.com/v4/letter/h/c2a13f/32.png) [@hijackgmh](https://forum.snapmaker.com/u/hijackgmh)\
**Post date:** [October 30, 2024, 4:48pm UTC](https://forum.snapmaker.com/t/luban-4-13-1-beta-2-3-2/38035/4 "2024-10-30T16:48:45Z")

</div>

I would like to, but not sure where to find it?

---

<div class="post-metadata">

**Author:** ![Skreelink](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/skreelink/32/16398_2.png) [@Skreelink](https://forum.snapmaker.com/u/Skreelink)\
**Post date:** [October 30, 2024, 5:07pm UTC](https://forum.snapmaker.com/t/luban-4-13-1-beta-2-3-2/38035/5 "2024-10-30T17:07:48Z")

</div>

All releases are found on their github;

> **[Releases · Snapmaker/Luban](https://github.com/Snapmaker/Luban/releases)**
>
> An easy-to-use 3-in-1 software tailor-made for Snapmaker machines. - Snapmaker/Luban

The latest stable is 4.13.0

---

<div class="post-metadata">

**Author:** ![hijackgmh](https://avatars.discourse-cdn.com/v4/letter/h/c2a13f/32.png) [@hijackgmh](https://forum.snapmaker.com/u/hijackgmh)\
**Post date:** [October 30, 2024, 5:23pm UTC](https://forum.snapmaker.com/t/luban-4-13-1-beta-2-3-2/38035/6 "2024-10-30T17:23:16Z")

</div>

Thanks. Just loaded 4.13.0 and it is working fine.

---

<div class="post-metadata">

**Author:** ![Mxbrnr](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/mxbrnr/32/27569_2.png) [@Mxbrnr](https://forum.snapmaker.com/u/Mxbrnr)\
**Post date:** [October 30, 2024, 5:26pm UTC](https://forum.snapmaker.com/t/luban-4-13-1-beta-2-3-2/38035/7 "2024-10-30T17:26:42Z")

</div>

Stable versions are also downloadable directly from the Snapmaker Support website.