# Looking for old model hot ends

**URL:** <https://forum.snapmaker.com/t/looking-for-old-model-hot-ends/29437>\
**Category:** Snapmaker 2.0 (3-in-1)\
**Created:** [February 1, 2023, 2:09am UTC](https://forum.snapmaker.com/t/looking-for-old-model-hot-ends/29437 "2023-02-01T02:09:33Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![CJEH](https://avatars.discourse-cdn.com/v4/letter/c/c2a13f/32.png) [@CJEH](https://forum.snapmaker.com/u/CJEH)\
**Post date:** [February 1, 2023, 2:09am UTC](https://forum.snapmaker.com/t/looking-for-old-model-hot-ends/29437/1 "2023-02-01T02:09:33Z")

</div>

I have a 2.0 A130, with an older 3d print module (the one without the front vents, words but no picture, and a hazard sticker. )

I got a clog in the hot end that I could not clear (even with heating to 260 and trying to manually push the filament through, grr), so I ordered new hot ends from Snapmaker on 'zon.

 ![HotEndDiff](https://us1.discourse-cdn.com/flex022/uploads/snapmaker/original/3X/d/2/d2d11d9adc85cdbb9c21aa25bb257389cb8e6550.png)

They do not look the same as the hot end I pulled out, and since installing the new one I’ve had a bunch of issues:

Constant clicking noise while printing  
Filament feed catching  
Module door flap is _extremely_ difficult to open and close  
Bed needs recalibrated constantly

I’m not thrilled with the idea of having to spend $100+ on a new module, so I’m hoping there’s some way to get a hold of the hot ends that will work with the one I have. If anyone knows of a source, please let me know.