# Linear module cables

**URL:** https://forum.snapmaker.com/t/linear-module-cables/15972
**Category:** Showcase & Prints
**Created:** [February 16, 2021, 4:22am UTC](https://forum.snapmaker.com/t/linear-module-cables/15972 "2021-02-16T04:22:18Z")
**Posts on this page:** 1
**Showing post:** 3

<div class="post-metadata">

### Author: ![xchrisd](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/xchrisd/32/1503_2.png) [@xchrisd](https://forum.snapmaker.com/u/xchrisd)
#### Post date: [February 20, 2021, 9:35am UTC](https://forum.snapmaker.com/t/linear-module-cables/15972/3 "2021-02-20T09:35:11Z")

</div>

Here you go, the plugs a re clarified in the post and available at mouser.

> [@Custom Extension Module](https://forum.snapmaker.com/t/custom-extension-module/13424/5):
>
> a pair of solderd D-Subs later Testing them also didnt kill my Controller and the Analyser is able to read CANbus so im assuming they are “to spec” ? Pinouts of the Snapmaker cabels, only CAN and power are used in my Connectors, Step and such arent requierd for my usage so they are shrinked off. DB9 Connector Pinout: 2: CAN\_L 3: CAN\_GND 6: GND 7: CAN\_H 9: CAN\_PWR Pin 3 and Pin 6 are connected inside the D-Sub Connectors in my …

---

_[View the full topic](https://forum.snapmaker.com/t/linear-module-cables/15972)._